Materials
Crochet Hook, Size E/4 (3.5 mm) 
Stitch Marker(s)
Scissors
Stuffing
Tapestry needle
Pins

• Safety eyes, 10 mm (optional)
• Chopstick, dowel, or something similar to help with stuffing small parts
• Embroidery Floss, white (optional)
• Embroidery Needle (optional)
• Red Heart Super Saver (worsted 4-Medium, 100% acrylic, 364 yds/333 m, 7 oz/198 g):
  • Brown Horse: Color (A) Coffee, used approx. 70 yds, Color (B) Warm Brown, used approx. 24 yds, Color (C) Soft White, used approx. 13 yds, Color (D) Black, used approx. 1 yd (optional, for eyes)
• Yarnspirations Caron One Pound (worsted 4-Medium, 100% acrylic, Approx 812 yds/742 m, 16 oz/453.6 g):
  • Grey Horse: Color (A) Medium Grey Mix, used approx. 70 yds, Color (B) Dark Grey Mix, used approx. 13 yds, Color (C) Off White, used approx. 24 yds, Color (D) Black, used approx. 1 yd (optional, for eyes)

Gauge
Using hook size E/4 (3.5 mm) the first 6 rounds of the body measure 2-1/8 to 2.25 inches in diameter depending on yarn used (Caron One Pound is slightly larger).

Finished Measurement
Using hook size E/4 (3.5 mm) the horse measures approximately 6 inches in the sitting position to the tip of the ear.

Design Notes

• The pattern is written using US crochet terminology.
• The pattern is written in rounds, it will be helpful to place a stitch marker at the beginning stitch of the round and move it up at the start of each additional round. 

• At the end of each round, the number of stitches for completion is noted in parentheses.
• Further design notes will be provided throughout the pattern to help aid in construction.
• Caution! If using safety eyes take into consideration who will be using the item. The use of safety eyes is not recommended for children under the age of three or for those prone to putting things in their mouth as they may cause a choking hazard. Crocheted or hand embroidered eyes are a great alternative!

Abbreviations/Stitches Used
bo -bobble (described below under special stitches)
ch – Chain
Rnd(s) – Round(s)
sc – Single crochet
sc2tog – Single crochet 2 stitches together (invisible decrease)
sl st – Slip stitch
st(s) – Stitch(s)
[ ] / ( )– Work instructions between brackets as many times as directed

magic circle/adjustable ring

Special Stitches
Bobble (bo): A 3dc bobble is used in the pattern. Essentially it’s 3 half-finished double crochets all in the same stitch that are joined at the end as one stitch, or a shortened version of a regular bobble stitch. Create the 3dc bobble as follows:
With the original single loop on the hook from the previous stitch,

1. Yarn over, insert hook into the next stitch,
2. Yarn over and pull up a loop (three loops on the hook),
3. Yarn over and pull through two of the loops,
4. Stop here! (two loops on your hook).
5. Now repeat steps 1-4, two more times, inserting the hook into the same stitch. Remember that each time the sequence is repeated there should be one more loop on the hook.
6. Now, yarn over and pull through all four of the loops on the hook. This closes the bobble stitch. Bobble made!

>Design Note: When making bobbles some patterns say to make a chain after the bobble has been made to secure them even more. This is NOT done in this pattern, simply make the next stitch as directed in the pattern.

Head
The head is worked from the front to the back.
Using Color (A)

• Rnd 1: 6sc in adjustable (magic) circle. (6sts)
• Rnd 1 alternative: If preferred, ch2 and then 6sc in 2nd chain from hook. (6sts)
• Rnd 2: 2sc in each st around. (12sts)
• Rnd 3: [Sc in the next st, 2sc in next st] 6 times. (18sts)
• Rnd 4:  Sc in each st around. (18sts)
• Rnd 5: [Sc in the next 2sts, 2sc in the next st] 6 times. (24sts)
• Rnd 6: Sc in each st around. (24sts)
• Rnd 7: Sc in the next 8sts, bo, sc in the next 6sts, bo, sc in the next 8sts. (24sts)
• Rnds 8-9: Sc in each st around. (24sts for 2 Rnds)
• Rnd 10: [Sc in the next 2sts, sc2tog] 6 times. (18sts)
• Rnd 11: Sc in each st around. (18sts)
• Rnd 12: [Sc in the next 2sts, 2sc in the next st] 6 times. (24sts)
• Rnd 13: [Sc in the next 3sts, 2sc in the next st] 6 times. (30sts)
• Rnds 14-17: Sc in each st around. (30sts for 4 Rnds)

If using safety eyes remember to insert them before stuffing and closing the head! Suggested placement is between Rnds 12 and 13, inside the two bo sts, approximately 3sts apart.
Firmly stuff and shape the head and continue to do so as the pattern progresses.

• Rnd 18: [Sc in the next 3sts, sc2tog] 6 times. (24sts)
• Rnd 19: Sc in each st around. (24sts)
• Rnd 20: [Sc in the next 2sts, sc2tog] 6 times. (18sts)
• Rnd 21: Sc in each st around. (18sts)
• Rnd 22: [Sc in the next st, sc2tog] 6 times. (12sts)
• Rnd 23: [Sc in the next st, sc2tog] 4 times. (8sts)
• Sl st to the first st and fasten off leaving a long tail to close up the hole. Close the hole with a tapestry needle stitching only through the front loops until the hole pulls nicely closed, secure and weave in the end.

Body
The body is worked from the base up towards the neck.
Using Color (A)

• Rnd 1: 6sc in adjustable (magic) circle. (6sts)
• Rnd 1 alternative: If preferred, ch2 and then 6sc in 2nd chain from hook. (6sts)
• Rnd 2: 2sc in each st around. (12sts)
• Rnd 3: [Sc in the next st, 2sc in next st] 6 times. (18sts)
• Rnd 4: [Sc in the next 2sts, 2sc in the next st] 6 times. (24sts)
• Rnd 5: [Sc in the next 3sts, 2sc in the next st] 6 times. (30sts)
• Rnd 6: [Sc in the next 4sts, 2sc in the next st] 6 times. (36sts)
• Rnds 7-12: Sc in each st around. (36sts for 6 Rnds)
• Rnd 13: [Sc in the next 4sts, sc2tog] 6 times. (30sts)
• Rnd 14: Sc in each st around. (30sts)
• Rnd 15: [Sc in the next 3sts, sc2tog] 6 times. (24sts)
• Rnds 16-17: Sc in each st around. (24sts for 2 Rnds)
• Firmly stuff and shape the body and continue to do so as the pattern progresses.
• Rnd 18: [Sc in the next 2sts, sc2tog] 6 times. (18sts)
• Rnds 19-21: Sc in each st around. (18sts for 3 Rnds)
• Sl st to the first st and fasten off leaving a long tail to attach the body to the head.

Arms
Make 2
Using Color (B)

• Rnd 1: 6sc in adjustable (magic) circle. (6sts)
• Rnd 1 alternative: If preferred, ch2 and then 6sc in 2nd chain from hook. (6sts)
• Rnd 2: 2sc in each st around. (12sts)
• Rnds 3-4: Sc in each st around. (12sts for 2 Rnds)

Switch to Color (C)
Rnd 5: Sc in each st around. (12sts)
Rnd 6: [Sc in the next st, sc2tog] 4 times. (8sts)

Firmly stuff and shape the arm and continue to do so as the pattern progresses. Do not stuff the top few rows so the arm can lie flatter against the body when attached.

Switch to Color (A)
Rnds 7-18: Sc in each st around. (8sts for 12 Rnds)
Rnd 19: Flatten the top edges together, lining up the stitches, sl st together. (4sts)
Fasten off leaving a long tail for attaching the arm to the body.

Legs
Make 2
Using Color (B)

• Rnd 1: 6sc in adjustable (magic) circle. (6sts)
• Rnd 1 alternative: If preferred, ch2 and then 6sc in 2nd chain from hook. (6sts)
• Rnd 2: 2sc in each st around. (12sts)
• Rnd 3: [Sc in the next st, 2sc in next st] 6 times. (18sts)
• Rnds 4-5: Sc in each st around. (18sts for 2 Rnds)

Switch to Color (C)
Rnd 6: Sc in each st around. (18sts)
Rnd 7: [Sc in the next 4sts, sc2tog] 3 times. (15sts)

Switch to Color (A)
Rnds 8-9: Sc in each st around. (15sts for 2 Rnds)
Rnd 10: [Sc in the next 5sts, sc2tog] 2 times, sc in the last st. (13sts)
Firmly stuff and shape the leg and continue to do so as the pattern progresses.
Rnds 11-14: Sc in each st around. (13sts for 4 Rnds)
Sl st to the first st and fasten off leaving a long tail for sewing the leg to the body.

Eyes
Make 2, if not using safety eyes
Using Color (D)
Cut a piece of yarn about 25 inches (64 cm) long. Looking at the individual strands pull the pieces apart so that there are two strands in each section. Use each of the sections to make an eye.
>Design Tip: Keeping all four strands together will make a larger eye. Using a thinner yarn would also work for a smaller eye.

• Rnd 1: 5sc in adjustable (magic) circle. (5sts)
• Rnd 1 alternative: If preferred, ch2 and then 5sc in 2nd chain from hook. (5sts)
• Sl st to the first st. Fasten off. Tie in the beginning tail and leave the end tail for attaching the eye to the head.
• >Design Option: Stitch a small white accent in the black portion of the eye using white embroidery floss or yarn.

Ears
Make 2
Using Color (A)

• Rnd 1: 4sc in adjustable (magic) circle. (4sts)
• Rnd 1 alternative: If preferred, ch2 and then 4sc in 2nd chain from hook. (4sts)
• Rnd 2: [Sc in the next st, 2sc in next st] 2 times. (6sts)

• Rnd 3: [Sc in the next 2sts, 2sc in next st] 2 times. (8sts)
• Rnd 4: Sc in each st around. (8sts)
• Rnd 5: [Sc in the next 3sts, 2sc in next st] 2 times. (10sts)

>Design Note: Push the starting tail up into the ear, but otherwise, don’t stuff the ears.

• Rnd 6: Flatten the top edges together, lining up the stitches, sl st together. (5sts)
• Fasten off leaving a long tail for attaching the ear to the head.

Assembly
Pin all the pieces together to determine the desired placement for the entire piece and then stitch them securely into place. Remember to add any additional stuffing needed before closing up the holes on the pieces requiring stuffing.

General placement and stitching suggestions:
Place the head on the body with the front of the body at about Rnd 12 of the head and the back at about Rnd 17.
Place the ears on the top of the head over about Rnds 18-19 with about 3-4sts between them.
Place the legs in the front of the body, in a sitting position, over about Rnds 6-11.
Place the arms on either side of the body about one round down from the head and neck join, either slanted forward or down to the sides.

>Design Note: The top few rounds of the arm were left unstuffed to help them lie flatter against the body. Another option is to tack them down to the body with a few stitches in the desired position.

Once the desired placement is achieved stitch all the pieces in place.

Mane and Tail
>Design Tip: To more quickly and evenly cut the mane and tail pieces cut a rectangular piece of cardboard (cereal or cracker box) to half the height of the finished length (3 inches) by any comfortable length. Starting and ending the wraps at the bottom of the cardboard, wrap the yarn around the 3-inch length of the cardboard as many times as desired (one full wrap is one strand). Cut across the bottom edge of the wraps to release them from the cardboard.

• Cut approximately 74 strands of yarn about 6 inches long for the mane and tail (in Color (B) for the Brown Horse and Color (C) for the Grey Horse, or the desired color). (56 for the mane and 18 for the tail)
  • The tail is looped holding two strands together, three loops wide by three loops tall centered at Rnds 7-9 of the body.
  • The mane pieces are looped one at a time (unless a fuller mane is desired, then loop two at a time but more loops will be needed) starting one row in front of the ears. Loop four across and end the loops at about the neck.
  • Trim mane and tail loops as desired.
    Congratulations
    
    More Amigurumi Horse İdeas :

For work we need:
– Yarn (semi-cotton, cotton) coffee, dark brown, milky and red (I have YarnArt Jeans)
– Threads (Iris) black
– Hook 2.0 mm
– Wooden ring (outer diameter 65 mm)
– Zvenelka
– Knitted needle with blunt tip
– Holofiber

Abbreviations
AR – Amigurumi Magic ring
MR – Amigurumi Magic ring
App – application
sc : Single Crochet
inc : Increase
dec : Decrease
tr : Triple Crochet/ Treble Crochet
st: Stitch
dc : Double Crochet
hdc: Half Double Crochet
sl-st : Slip Stitch
ch : Chain
..in : make increase into same stitch as many as the number which is given in front of “inc” abbreviation (exp; 3inc, 4inc..).
FLO : Crochet into front loops only
BLO : Crochet into back loops only
BL : Bobble Stitch – do 5dc all in the same stitch and then yarn over and pull through all the loops on your hook (the original loop + 1 loop for each partially completed dc)

Head
With a coffee-colored thread:
1) 6sc in MR (6)
2) 6inc (12)
3) (1sc, inc)*6 (18)
4) (2sc, inc)*6 (24)
5) (Зsc, inc)*6 (30)
6) 30 sc
7) (4sc,inc)*6 (36)
8) 36 sc
9) (5sc, inc)*6 (42)
10) 42 sc
11) (6sc, inc)*6 (48)
12)-19) 48 sc
20) (6sc, dec)*6 (42)
21) (5sc, dec)*6 (36)
22) (4sc, dec)*6 (30)
Fill with holofiber and insert a ring
23) (Зsc, dec)*6 (24)
24) (2sc, dec)*6 (18)
25) (1sc, dec)*6 (12)
Without closing the loop to the end, leave a hole and the end of the thread 20-30 cm long for sewing. Add holofiber

Muzzle
With a coffee-colored thread:
1) 6sc in MR (6)
2) 6inc (12)
3) (1sc, inc)*6 (18)
4) (2sc, inc)*6 (24)
5) 24sc (24)
6) (3sc, inc)*6(30)
7)-9) 30sc (30)
10) (4sc, inc)*6 (36)
Fasten and cut the thread, leaving a 20 cm end for sewing.

Ears (2 pcs)
With a coffee-colored thread:
1) 6sc in MR (6)
2) 6sc (6)
3) (1sc, inc)*3 (9)
4) 9sc (9)
5) (2sc, inc)*4 (12)
6) 12sc (12)
7) (6sc, inc) *2 (14)
8) 14sc (14)
9) (7sc, inc)*2 (16)
10)-22) 16sc
Fasten and cut the thread, leaving a sewing end 15 cm long.
Do not fill with holofiber !!!

Ring clamp N1
– Cast on 10 ch with a coffee-colored thread (The number of loops depends on the thickness of the ring and the yarn, therefore, having knitted 3-4 rows, you need to try on the clamp on the ring. It should sit very tightly!)
– Turn the work and starting from the 2nd loop, knit 9 sc
– 1LL and knit back 9sc
So we continue to knit to the length you need. I have 32 rows. Fasten and cut the thread, leaving the end for sewing.
Ring clamp N2
– Dial 10 ch with a coffee-colored thread (The number of loops depends on the thickness of the ring and the yarn, therefore, having knitted 3-4 rows, you need to try on the clamp on the ring. It should sit very tightly!)
– Turn the work and starting from the 2nd loop, knit 9 sc
– LL and knit back 9sc
So we continue to knit 8 rows Fasten and cut the thread, leaving the end for sewing.

Collar
1) With a red thread, dial 15 ch plus 2LL (17)
2) Turn the work and starting with 3 loops, knit 2 sc in each loop (30)
3) Turn the work and, starting from the first loop, knit 3dc in each loop (90)
4) Turn the work and starting from the first loop, knit 90dc (90).
Leave the end of the thread for sewing

Assembly
Sew the muzzle, filling it with holofiber, to the head between 8 and 2 rows from the middle.
Fold the ears at the base and even in half, sew to the head on the sides between 2 and 5 rows from the middle. Black thread Embroider eyes and nostrils. Embroider a spot on the forehead with a milky thread.

Mane
Cut off dark brown threads 8 cm long in the amount of 30 pieces.
Using a crochet hook, fasten 2 threads along the course of the mane from the crown of the head to the back of the head. At the top of the head, you can cut the length a little and fluff it up. Then sew the clamps to the ringlet and turn the seam inside the ringlet.
Sew the head to the clamp N1. Milking this with the help of pins, mark the middle of the clamp and secure the head so that it is in the center. Further, passing several times in a circle, we firmly sew the head to the clamp so that it does not dangle.
Congratulations

More Amigurumi Horse Ideas

Materials
Brown, Light Brown, Black, White, and
Cream #4 worsted weight (Aran) yarn
(you will need aprx. 350 yds of the body color)
for unicorn version, White, Lavender, Yellow,
Blue, and Pink yarn
Scissors
Yarn needle
Stitch marker
3.5 mm crochet hook
Stuffing

US Terms
Single Crochet : sc
Double Crochet : dc
Slip Stitch : sl st
Decrease : dec
– single crochet 2 stitches together
Increase : inc
– work 2 single crochet stitches in the
same stitch

Body
-light brown yarn/white for unicorn
Rnd. 1: Make adjustable ring (6)
Rnd. 2: sc 2x in each stitch (12)
Rnd. 3: sc 1x, inc 6x (18)
Rnd. 4: sc 2x, inc 6x (24)
Rnd. 5: sc 3x, inc 6x (30)
Rnd. 6: sc 4x, inc 6x (36)
Rnd. 7: sc 5x, inc 6x (42)
Rnd. 8: sc 6x, inc 6x (48)
Rnd. 9-27: sc in each stitch (48)
Rnd. 28: sc 6x, dec 6x (42)
Rnd. 29: sc 5x, dec 6x (36)
Rnd. 30: sc 4x, dec 6x (30)
Rnd. 31: sc 3x, dec 6x (24)
Rnd. 32: sc 2x, dec 6x (18)
-stuff –
Rnd. 33: sc 1x, dec 6x (12)
Rnd. 34: dec (6)
slip stitch, pull yarn thru the stitch leaving a long tail
-using the long tail sew the opening closed

Legs (make 4)
-start with dark brown yarn/ lavender for unicornRnd. 1: Make adjustable ring (6)
Rnd. 2: sc 2x in each stitch (12)
Rnd. 3: sc 1x, inc 6x (18)
Rnd. 4: sc 2x, inc 6x (24)
Rnd. 5: sc 3x, inc 6x (30)
Rnd. 6-8: sc in each stitch (30)
-change to light brown yarn/ white for unicornRnd. 9: sc in each stitch (30)
Rnd. 10: sc 3x, dec 6x (24)
Rnd. 11-13: sc in each stitch (24)
Rnd. 14: sc 2x, dec 6x (18)
Rnd. 15-23: sc in each stitch (18)
slip stitch, pull yarn thru the stitch leaving a
long tail
-stuff-

Ears
-light brown yarn/ white for unicornRnd. 1: Make adjustable ring (6)
Rnd. 2: sc in each stitch (6)
Rnd. 3: sc 1x, inc 3x (9)
Rnd. 4: sc 2x, inc 3x, sc last stitch (12)
slip stitch, pull yarn thru the stitch leaving a long tail
Eyes
-white yarn
-blue yarn for unicorn as white will not show
up on a white body
Rnd. 1: Make adjustable ring (6) (5 white and 1 black)
-on the 6th adjustable ring stitch, change to black yarn
-sl st

Head
-start with cream yarn/white for unicorn
Rnd. 1: Make adjustable ring (6)
Rnd. 1: sc 2x in each stitch (12)
Rnd. 2: sc 1x, inc 6x (18)
Rnd. 3: sc 2x, inc 6x (24)
Rnd. 4: sc 3x, inc 6x (30)
Rnd. 5: sc 4x, inc 6x (36)
Rnd. 6-9: sc in each stitch (36)
Rnd. 10: sc 5x, inc 6x (42)
Rnd. 11: sc in each stitch (42)
-change to light brown yarn/continue with white for unicorn
Rnd. 12-13: sc in each stitch (42)
Rnd. 14: sc 6x, inc 6x (48)
-this next round creates a raised area on one side of the head (the forehead), you will be
working 6 increases in the round, however they will not be evenly spaced like they have
been in the previous rounds. I have tried to clarify the placement of the increase stitches
below
Rnd. 15: sc 17x, inc, sc 2x, inc, sc 3x, inc, sc 2x, inc, sc 17x, inc, sc 1x, inc (54)
– You have just made the forehead area where you will add the eyes later.
Rnd. 16: sc 8x, inc 6x (60)
Rnd. 17-19: sc in each stitch (60)
Rnd. 20: sc 8x, dec 6x (54)
Rnd. 21-22: sc in each stitch (54)
Rnd. 23: sc 7x, dec 6x (48)
Rnd. 24: sc in each stitch (48)
Rnd. 25: sc 6x, dec 6x (42)
Rnd. 26: sc 5x, dec 6x (36)
Rnd. 27: sc 4x, dec 6x (30)
Rnd. 28: sc 3x, dec 6x (24)
Rnd. 29: sc 2x, dec 6x (18)
Rnd. 30: sc 1x, dec 6x (12)
Rnd. 31: dec 6x (6)
slip stitch, pull yarn thru the stitch leaving a long tail

Unicorn Horn
You will work all the stitches in the back loop only (blo) to create a spiral ridge going
around the horn- use yellow yarn
Rnd. 1: make adjustable ring (6)
Rnd. 2: sc in the back loop only in each stitch (6)
Rnd. 3: sc blo 1x, inc blo 3x (9)
Rnd. 4-8: sc blo in each stitch (9)
Rnd. 9: sc blo 2x, inc blo 3x (12)
Rnd. 10-11: sc blo in each stitch (12)
Slip stitch and pull yarn thru leaving a long tail

Assembly
– fold the ears to create little pockets and stitch
ears on the sides of the head in the 12th Rnd.
up from the cream/light brown color change.
Be sure the head is positioned so the raised side
of the head is on top and the ears are 6 stitches
apart from each other.
-if making a unicorn sew the horn to the
forehead between the ears before adding hair

– You can begin to add hair now, or wait until
you have sewn the eyes and neck in place. Cut
about 100, 10 inch strands of dark brown yarn
or blue, pink, and lavender for unicorn.
An easy way to do this is to wrap the yarn
around something and then cut through all the
layers at once.

– To add the hair insert your hook into the sc
stitches on the head and pull the center of a
piece of yarn through the stitch and then loop
it through itself. Repeat all the way down the
head and neck. Cut the yarn pieces about 2-3
inches long as desired to look natural

Neck
-light brown yarn/white for unicorn
Rnd. 1: Make adjustable ring (6)
Rnd. 2: sc 2x in each stitch (12)
Rnd. 3: sc 1x, inc 6x (18)
Rnd. 4: sc 2x, inc 6x (24)
Rnd. 5: sc 3x, inc 6x (30)
Rnd. 6-7: sc in each stitch (30)
Rnd. 8: sc 4x, inc 6x (36)
– sew the neck to the head centered under the ears about 6 rounds back from the
cream/brown color line.
– sew the eyes 6 rounds in front of the ears, centered on the head making sure the black
pupils are facing forward.
– continue adding hair down the back of the head.
– sew the neck to the body 3 rows up from the body’s adjustable ring, making sure to stuff it
firmly before finishing.

Tail Base
Use dark brown/lavender for unicorn
Rnd. 1: Make adjustable ring (6)
Rnd. 1: sc 2x in each stitch (12)
Rnd. 2-3: sc in each stitch (12)
Rnd. 4: sc 1x, inc 6x (18)
Rnd. 5: sc in each stitch (18)
Rnd. 6: dec until closed
sl st, and pull yarn through leaving a long tail
-stuff and then using the long tail stitch the end shut
-sew the small end of the tail base to the back of the horse body sticking up and out.
-using the same technique as on the head add hair strands to the tail base until it looks
full. Cut the strands about 4-5 inches long as desired.

– sew the legs to the bottom “corners” of the body. Space them so they are all the way at the
front and back of the body as far as they can go.
– using light brown yarn stitch slanted nostrils on the front of the nose 6 stitches apart.

We finished our pattern. You can send the finished pattern to me on facebook, instagram and pinterest.

https://www.facebook.com/amigurumi.sdk.today/
https://www.instagram.com/amigurumifreepatternss/
https://www.pinterest.com/crochetblogkb/

More Amigurumi Horse İdeas