Abbreviations:
Ch – chain stitch
SC – single crochet stitch
DC – double crochet
DEC – decrease
INC – increase
[…] – number of stitches you should have at the end of the row

Materials
– cotton yarn in light blue, white and pink, black (leftover) 200m/50gr, 100% or any analogous
– 2.5 mm crochet hook;
– fiberfill for stuffing
– yarn needle
– stitch markers
– safety eyes (8 mm)
– white acrylic paint (at will)
Gellyfish length – 11.81 inches (30 см)

Jellyfish body
(Size B-1 / 2.5 mm crochet hook. Yarn in light blue)
Rnd 1) start 6 sc in a magic ring (6)
Rnd 2) (inc) repeat 6 times (12)
Rnd 3) (sc, inc) repeat 6 times (18)
Rnd 4) (2sc, inc) repeat 6 times (24)
Rnd 5) (3sc, inc) repeat 6 times (30)
Rnd 6) (4sc, inc) repeat 6 times (36)
Rnd 7) (5sc, inc) repeat 6 times (42)
Rnd 8) (6sc, inc) repeat 6 times (48)
Rnd 9) (7sc, inc) repeat 6 times (54)
Rnd 10-13) 54 sc
Rnd 14) (4sc, dec) repeat 9 times (45)
Rnd 15-16) 45 sc
Rnd 17) (3sc, dec) repeat 9 times (36)
Rnd 18) 36 sc
Cut the thread.

Insert the safety eyes mount between the 13 and 14 rows. Between eyes 4 loops.
Sew cilia with in black thread. Pink thread sews a smile. White paint on the eyes makes glare

Bottom
Rnd 1) start 6 sc in a magic rin (6)
Rnd 2) (inc) repeat 6 times (12)
Rnd 3) (sc, inc) repeat 6 times (18)
Rnd 4) (2sc, inc) repeat 6 times (24)
Rnd 5) (3sc, inc) repeat 6 times (30)
Rnd 6) (4sc, inc) repeat 6 times (36)
Cut the thread.

Connect the head and bottom of the jellyfish with crochet end points. Crochet with a white thread 36 sc

Without tying to the end of the row, filling the jellyfish with filler is not tight!
Crochet the next row with a white thread according to scheme. Cut and hide inside.

Next, we crochet a blue main thread loop – holder. Leave 11.81 inches (30 cm) of thread crochet a chain of 20 air loops, the end is also 11.81 inches (30 cm). insert a thread the hook in the middle of the bottom of the jellyfish and take out a thread in beginning of crochet, grab one end of the thread, pull out from the bottom. insert the hook into the bottom, 1 loop from the middle, remove from the head, through 1 loop from the middle, remove from the bottom and tie the make a knot.

Tentacles of jellyfish
1 tentacle. With white yarn, chain stitch of 55 ch, into the second loop from the hook 6sc close in a
ring. Trim the thread, leaving a tail for sewing.

2 tentacles. With white yarn, chain stitch of 55 ch, crochetin the 3 –nd ch from the hook 3DC in
each loop (159). Trim the thread, leaving a tail for sewing.

3 tentacles. With white yarn, chain stitch of 65 ch, crochetin the 3 –nd ch from the hook 2DC in
each loop (126). Trim the thread, leaving a tail for sewing.

4 tentacles. With light blue yarn, chain stitch of 40 ch, crochetin the 3 –nd ch from the hook 3DC
in each loop (111). Trim the thread, leaving a tail for sewing.

5 tentacles. With light blue yarn, chain stitch of из 50 ch, crochetin the 3 –nd ch from the hook
2DC in each loop (94). Trim the thread, leaving a tail for sewing.

Tie tentacles around the middle of the bottom, hide the ends.

We finished our pattern. You can send the finished pattern to me on facebook, instagram and pinterest.

https://www.facebook.com/amigurumi.sdk.today/
https://www.instagram.com/amigurumifreepatternss/
https://www.pinterest.com/crochetblogkb/

More Amigurumi Jellyfish Ideas

Materials
Rope
8mm Size Locked eye
Bead fiber
2mm crochet
White felt

Terms
Mr: Magic ring
sc: Single crochet
inc: Increase
dec: Decrease

Amigurumi Koala Recipe
Head Making
We start the construction of our koala with gray rope.
Rnd 1) 6 sc into Mr
Rnd 2) 6 inc (12 sc)
Rnd 3) (1 sc, 1 inc) * 6 (18 sc)
Rnd 4) (2 sc, 1 inc) * 6 (24 sc)
Rnd 5) (3 sc, 1 inc) * 6 (30 sc)
Rnd 6) (4 sc, 1 inc) * 6 (36 sc)
Rnd 7) (5 sc, 1 inc) * 6 (42 sc)
Rnd 8) (6 sc, 1 inc) * 6 (48 sc)
Rnd 9) 48 sc
Rnd 10) (7 sc, 1 inc) * 6 (54 sc)
Rnd 11-18) 54 sc
Rnd 13-14. We install eyes on white felt between the rows.
Rnd 19) (7 sc, 1 dec) * 6 (48 sc)
Rnd 20) (6 sc, 1 dec) * 6 (42 sc)
Rnd 21) (5 sc, 1 dec) * 6 (36 sc)
Rnd 22) (4 sc, 1 dec) * 6 (30 sc)
Rnd 23) (3 sc, 1 dec) * 6 (24 sc)
We finish it and fill it with fiber and leave thread for fine sewing.

Koala Head Recipe
Since our koala is a single color animal, we use gray rope in the head.
Rnd 1) 6 sc into Mr
Rnd 2) 6 inc (12 sc)
Rnd 3) (1 sc, 1 inc) * 6 (18 sc)
Rnd 4) (2 sc, 1 inc) * 6 (24 sc)
Rnd 5) (3 sc, 1 inc) * 6 (30 sc)
Rnd 6) (4 sc, 1 inc) * 6 (36 sc)
Rnd 7) (5 sc, 1 inc) * 6 (42 sc)
Rnd 8-15) 42 sc
Rnd 16) (4 sc, 1 dec) * 6 (36 sc)
Rnd 17) 36 sc
Rnd 18) (3 sc, 1 dec) * 6 (30 sc)
Rnd 19) 30 sc
Rnd 20) (2 sc, 1 dec) * 6 (24 sc)
Rnd 21) 24 sc
We fill it with fiber and close it. After this stage, you can make the arms and combine the arms to the body if you want.

Legs
We knit two legs and we use gray rope as well as the other thin parts.
Rnd 1) 5 sc into Mr
Rnd 2) 5 inc (10 sc)
Rnd 3) (1 sc, 1 inc) * 5 (15 sc)
Rnd 4) (2 sc, 1 inc) * 5 (20 sc)
Rnd 5) (3 sc, 1 inc) * 5 (25 sc)
Rnd 6) 25 sc
Rnd 7) (3 sc, 1 dec) * 5 (20 sc)
Rnd 8) 3 dec, 14 sc (17 sc)
Rnd 9) 2 dec, 13 sc (15 sc)
Rnd 10-13) 15 sc
Rnd 14) 1 dec, 13 sc (14 sc)
Rnd 15-19) 14 sc
Now that the legs are finished, we fill the fiber inside and leave a rope to sew to the body.

Arms
We use gray rope on the arms as in the other parts of the body.
Rnd 1) 5 sc into Mr
Rnd 2) 5 inc (10 sc)
Rnd 3) (1 sc, 1 inc) * 5 (15 sc)
Rnd 4) (2 sc, 1 inc) * 5 (20 sc)
Rnd 5) 20 sc
Rnd 6) (2 sc, 1 dec) * 5 (15 sc)
Rnd 7-10) 15 sc
Rnd 11) 1 dec, 13 sc (14 sc)
Rnd 12-15) 14 sc
Rnd 16) 1a, 12 sc (13 sc)
Rnd 17-18) 13 sc
We fill it with fiber and finish it. The length of the arms should correspond to where the leg begins. Do not forget to adjust the size yourself according to the brand of ip you will use.

Ear
We will use two colored threads in ear making. First, we do the general structure of the ear, its outer part.
Rnd 1) 6 sc into Mr
Rnd 2) 6 inc (12 sc)
Rnd 3) (1 sc, 1 inc) * 6 (18 sc)
Rnd 4) (2 sc, 1 inc) * 6 (24 sc)
Rnd 5-9) 24 sc
Rnd 10) (2 sc, 1a) * 6 (18 sc)
We finish.

Inner ear
We use white thread at this stage in ear making. Do not forget to knit two, as there will be two ears.
Rnd 1) 6 sc into Mr
Rnd 2) 6 inc (12 sc)
Rnd 3) (1 sc, 1 inc) * 6 (18 sc)
We sew the inner ears that we have finished by centering the ear itself.

Nose
It should be evident in our nose model. We use black thread in nose construction.
Rnd 1) We draw 5 chains, make 2 sc on it, make 3 sc in the last loop. Turn to the other side and make 2 sc, 3 sc in the last loop.
Rnd 2) (3 sc, 3 inc) * 2 (18 sc)
Rnd 3-4) 18 sc

We finished our pattern. You can send the finished pattern to me on facebook, instagram and pinterest.

https://www.facebook.com/amigurumi.sdk.today/
https://www.instagram.com/amigurumifreepatternss/
https://www.pinterest.com/crochetblogkb/

More Amigurumi Koala Ideas

Supply List:
Yarn – Worsted weight yarn in black, white, yellow, light blue, and red. I used Rico Creative Cotton Aran (less than one 50g skein per color) in Black, White, Ice Blue, Cherry, and Sand  
Size US E/3.5mm crochet hook
Yarn needle
Stuffing
Stitch marker
2 safety eyes, 9 mm

Key (Stitches Used):
magic ring
ch – chain
ss – slip stitch
sc – single crochet
hdc – half double crochet
sc2tog – single crochet 2 together
invdec – invisible decrease (an alternative to the sc2tog stitch). To invdec, insert your hook through the front loop of the indicated st, then insert your hook into the front loop of the next st.  Your hook is now inserted into the front loops of both stitches you’d like to decrease into one stitch. Yarn over and draw up loop through both sts, then yarn over and pull through two loops on hook.

Beak:
R1: In sand, 4 sc in a magic ring. (4)
R2: (Sc, 2 sc) 2x around. (6)
R3: (Sc, 2 sc) 3x around. (9)
If needed, use the end of your hook to push the beak outward so it has a cone shape. Fasten off, leaving a long tail for attaching. Set aside.

‍Head:
Head is worked from top to bottom.
R1: In black, 6 sc in a magic ring. (6)    
R2: 2 sc in each st around. (12)
R3: (Sc, 2 sc) 6x around. (18)
R4: (Sc in next 2 sts, 2 sc) 6x around. (24)
R5: (Sc in next 3 sts, 2 sc) 6x around. (30)
R6: (Sc in next 4 sts, 2 sc) 6x around. (36)
R7: (Sc in next 5 sts, 2 sc) 6x around. (42)
R8: (Sc in next 6 sts, 2 sc) 6x around. (48)
R9-10: Sc in each st around.
You’ll now begin switching between black and white yarn for the penguin’s face. Do not trim and fasten off between rounds; instead, carry each color through inside the head.
R11: 19 sc in black, 4 sc in white, 3 sc in black, 4 sc in white, 18 sc in black.
R12: 18 sc in black, 5 sc in white, 3 sc in black, 5 sc in white, 17 sc in black.
R13: 17 sc in black, 7 sc in white, 1 sc in black, 7 sc in white, 16 sc in black.
R14-R17: 16 sc in black, 17 sc in white, 15 sc in black.
R18: In black, (sc in next 5 sts, invdec) 2x, 2 sc. In white, invdec, 13 sc, invdec. In black, (sc in next 5 sts, invdec) 2x, 1 sc. (42)
R19: In black, (sc in next 4 sts, invdec) 2x, 2 sc. In white, invdec, 11 sc, invdec. In black, (sc in next 4 sts, invdec) 2x, 1 sc. (36)
R20: In black, (sc in next 3 sts, invdec) 2x, 2 sc. In white, invdec, 9 sc, invdec. In black, (sc in next 3 sts, invdec) 2x, 1 sc. (30)
R21: In black, (sc in next 2 sts, invdec) 2x, 2 sc. In white, invdec, 7 sc, invdec. In black, (sc in next 2 sts, invdec) 2x, 1 sc. (24)

Fasten off with the white yarn, securing by knotting or weaving inside the head. Attach safety eyes between rounds 14 and 15, about 9 sts apart. Attach beak, centered between eyes. Stuff the head.

R22: In black, (sc in next 2 sts, invdec) 6x around. (18)
R23: (Sc, invdec) 6x around. (12)
R24: Sc2tog until closed. Fasten off, using yarn needle to pull tightly through final stitches to close completely. Weave in end.

Body:
Body is worked from bottom to top.
R1-R8: In black, repeat rounds 1-8 of head. (48)
You’ll again switch between black and white now, carrying the colors through inside the body.
R9-R16: 15 sc in black, 18 sc in white, 15 sc in black.
R17: (Sc in next 6 sts, invdec) 6x around, continuing to change from black to white and back to black – 13 sc in black, 16 sc in white, 13 sc in black. (42)
R18-R19: 13 sc black, 16 sc in white, 13 sc in black.
R20: (Sc in next 5 sts, invdec) 6x around – 11 sc in black, 14 sc in white, 11 sc in black. (36)
R21-R22: 11 sc in black, 14 sc in white, 11 sc in black.
R23: (Sc in next 4 sts, invdec) 6x around – 9 sc in black, 12 sc in white, 9 sc in black. (30)
R24: (Sc in next 3 sts, invdec) 6x around – 7 sc in black, 10 sc in white, 7 sc in black. (24)
R25: (Sc in next 2 sts, invdec) 6x around – 5 sc in black, 8 sc in white, 5 sc in black. (18)
R26: 5 sc in black, 8 sc in white, 5 sc in black.  
Fasten off both black and white yarn, leaving long tails.  Stuff body completely and attach head to body (you can use black yarn tail on black sts of the head and white yarn tail on white sts of the head).

Wings (make 2):
R1: In black, 4 sc in a magic ring. (4)
R2: (Sc, 2 sc) 2x around. (6)
R3: (Sc, 2 sc) 3x around. (9)
R4: (Sc in next 2 sts, 2 sc) 3x around. (12)
R5: (Sc in next 3 sts, 2 sc) 3x around. (15)
R6: (Sc in next 4 sts, 2 sc) 3x around. (18)
R7-R14: Sc in each st around.
Fasten off, leaving long tail for attaching. Do not stuff. Attach to sides of body.

Feet (make 2):
R1: In Sand, 6 sc in a magic ring. (6)
R2: 2 sc in each st around. (12)
R3: Ss in first st of this round, then (ch 3, ss in next st) 3x.  Fasten off, weaving in ends.
Attach feet to underside of body.

Earmuffs (make 2):
R1: In Ice Blue, 6 sc into a magic ring. (6)
R2: 2 sc in each st around. (12)
R3: (Sc, 2 sc) 6x around. (18)
R4-R5: Sc in each st around.
Fasten off, leaving long tail for attaching.

To make the band, ch 19.
R1: Sc in 2nd ch from hook and in each ch across, ch 1, turn. (18)
R2: Sc in each st across.
Fasten off, leaving long tail for attaching.
Attach band across top of head. Attach round muffs at either side of the band, stuffing lightly if desired.

Scarf:
In Cherry, ch 5.
R1: Hdc in 2nd ch from hook and in each st across, ch 2, turn. (4)
R2-R44: In front loops only, hdc in each st across, ch 2, turn.  
Fasten off, weaving in ends. Wrap scarf around Chilly’s neck and attach with a stitch where the scarf overlaps itself.

We finished our pattern. You can send the finished pattern to me on facebook, instagram and pinterest.

https://www.facebook.com/amigurumi.sdk.today/
https://www.instagram.com/amigurumifreepatternss/
https://www.pinterest.com/crochetblogkb/

More Amigurumi Penguin Ideas

HEAD and neck – TESTA e collo – TÊTE et cou
With turquoise color yarn – Con filo turchese – Avec le fil turquoise
Hook 1,25 – Uncinetto 1,25 – Crochet 1,25
R 1. 6sc in MR
R 2. 6inc = 12
R 3. (1sc,inc)x6 = 18
R 4. 3sc, 5ch, sk 2sc, 7sc, 5ch, sk 2sc, 4sc = 24
R 5. 3sc, 5sc – on the chain/sulla catena/sur la chaîne, 7sc, 5sc – on the chain/sulla catena/sur la chaîne , 4sc = 24
R 6. (3sc,inc)x6 = 30
R 7. 30sc
R 8. (4sc,inc)x6 = 36
R 9. 36sc
R 10. (5sc,inc)x6 = 42
R 11. 42sc
R 12. (6sc,inc)x6 = 48
R 13. 48sc
R 14. (3sc,inc)x12 = 60
R 15.-22. 60sc (8rds)
R 23. (3sc,dec)x12 = 48
R 24. (2sc,dec)x12 = 36
R 25. (1sc,dec)x12 = 24
R 26.-27. 24sc (2rds)
R 28. (2sc,dec)x6 = 18
R 29.-30. 18sc (2rds)
R 31. (5sc,inc)x3 = 21
R 32.-33. 21sc (2rds)
R 34. (6sc,inc)x3 = 24
R 35.-36. 24sc (2rds)
R 37. (7sc,inc)x3 = 27
R 38.-39. 27sc (2rds)
R 40. (8sc,inc)x3 = 30
R 41.-42. 30sc (2rds) FO. Leave a long tail for sewing! – Lasciare una lunga coda per cucire! – Laissez une longue queue pour la couture!

TENTACLESx2 – TENTACOLIx2 – TENTACULESx2
Start with turquoise color yarn – Iniziare con filo turchese – Commencer avec le fil turquoise
From round 4 of the head where we have the holes, we crochet the tentacles.
Dal giro 4 della testa dove abbiamo i buchi, lavoriamo i tentacoli.
Du tour 4 de la tête où nous avons les trous, nous crochetons les tentacules.
R 1. 8sc
R 2. (2sc, dec)x2 = 6
R 3.-7. FLO: 6sc (5rds) Cut the yarn/Tagliare il filo/Couper le fil.
Change to light yellow color yarn – Cambiare con filo giallo chiaro – Changer avec du fil jaune clair
R 8. FLO: 6inc = 12
R 9.-11. 12sc (3rds) (3sc,inc)x3 = 15
R 12. 6dec = 6
Sew the hole! Cucire il buco! Coudre le trou!
Sew the white lace to the tentacles as in the photo./Cucire il pizzo bianco ai tentacoli come nella foto./Cousez la dentelle blanche aux tentacules comme sur la photo.

NOSE – NASO – NEZ
With light yellow color yarn – Con filo giallo chiaro – Avec le fil jaune clair
R 1. 6sc in MR
R 2. 6inc = 12
R 3. (3sc,inc)x3 = 15
R 4. 15sc
R 5. (3sc,dec)x3 = 12
R 6. 6dec = 6 FO.
Stuff/Riempire/Remplir!
Leave a tail for sewing! – Lasciare una coda per cucire! – Laissez une queue pour la couture!

FOOT – PIEDE – PIED
With turquoise color yarn – Con filo turchese – Avec le fil turquoise
R 1. 21ch, from the second ch from hook – dalla seconda cat dal gancio – de la seconde ch du crochet: 19sc, 3sc (in the last ch – nell’ultima cat – dans la dernière ch) , and on the other side of the chain – e dall’altro lato della catena – et de l’autre côté de la chaîne : 18sc, 1inc = 42
R 2. 1inc, 18sc, 3inc, 18sc, 2inc = 48
R 3. 16sc, 4hdc, 4inchdc, 4hdc, 18sc, 2inc = 54
R 4. 14sc, 8hdc, 6inchdc, 8hdc, 15sc, 2inc, 1sc = 62
R 5. 12sc, 12hdc, 8inchdc, 12hdc, 14sc, 2inc, 2sc = 72 FO.
Make a cardboard sole/Fare una suola di cartone/Faire une semelle en carton.
Crochet another one and don’t cut the thread and continue/Lavorare un altro e non tagliare il filo e continuare/Crocheter un autre et ne pas couper le fil et continuer.
R 6.-8. 72sc (3rds)
Place one on top of the other and crochet/Mettere uno sopra l’altro e lavorare/Placer l’un sur l’autre et crocheter:
R 9. 72sc (penetrating with the hook the both soles/penetrando con il gancio entrambe le suole/ pénétrant avec le crochet les deux semelles)
Put the cardboard sole!Mettere la suola di cartone!Mettez la semelle en carton!
Stuff while you crochet! Riempi mentre che lavori! Remplissez pendant que vous travaillez!
Sew the edge with turquoise lace as in the photo./Cucire il bordo con pizzo color turchese come nella foto./Cousez le bord avec de la dentelle turquoise comme sur la photo.

HAT – CAPPELLO – CHAPEAU
With light purple color yarn – Con filo viola chiaro – Avec le fil violet clair
R 1. 6sc in MR
R 2. 6inc = 12
R 3. (1sc,inc)x6 = 18
R 4. (2sc,inc)x6 = 24
R 5. (3sc,inc)x3 = 30
R 6. (4sc,inc)x6 = 36
R 7. (5sc,inc)x6 = 42
R 8. (6sc,inc)x6 = 48
R 9. (7sc,inc)x6 = 54
R 10. (8sc,inc)x6 = 60
R 11. (9sc,inc)x6 = 66
R 12. (10sc,inc)x6 = 72
R 13. (11sc,inc)x6 = 78
R 14. (12sc,inc)x6 = 84
R 15. (13sc,inc)x6 = 90
R 16. (14sc,inc)x6 = 96
R 17. (15sc,inc)x6 = 102
R 18. (16sc,inc)x6 = 108
R 19.-20. 108sc (2rds)
R 21. folds/pieghe/plis (photo/foto)
[Fold on 2sc (in each fold are 6sc), 2sc on the fold penetrating with the hook the both edges , 2sc] – all the round
[Piegare su 2mb (in ogni piega sono 6mb), 2mb sulla piega penetrando con il gancio su entrambi i bordi, 2mb] – tutto intorno
[Plier sur 2ms (dans chaque pli sont 6sc), 2ms sur le pli pénétrant avec le crochet les deux bords, 2ms] – tout le tour
Change with light yellow color yarn – Cambiare con filo giallo chiaro – Changez avec le fil jaune clair:
R 22. FLO: 3sc in every stitch all the round/FLO: 3mb in ogni maglia tutto il giro/FLO: 3ms dans chaque maille tout le tour
R 23.-24. Sc all the round/mb tutto il giro/ms tout le tour (2rds)
R 25. Sew the edge with lilac lace at row 22, in BLO, as in the photo./Cucire il bordo con pizzo color lilla, nel giro 22, in BLO, come nella foto./Cousez le bord avec de la dentelle lilas, au tour 22, en BLO, comme sur la photo.

SHELL – CONCHIGLIA – COQUILLE
First Part – Prima Parte – Première Partie
With light purple color yarn – Con filo viola chiaro – Avec le fil violet clair
R 1. 6sc in MR
R 2. 6sc
R 3. (2sc,inc)x2 = 8
R 4. 8sc
R 5. (3sc,inc)x2 = 10
R 6. 10sc
R 7. (4sc,inc)x2 = 12
R 8. 12sc
R 9. (5sc,inc)x2 = 14
R 10. 14sc
R 11. (6sc,inc)x2 = 16
R 12. 16sc
R 13. (7sc,inc)x2 = 18
R 14. 18sc
R 15. (8sc,inc)x2 = 20
R 16. 20sc
R 17. (9sc,inc)x2 = 22
R 18. 22sc
R 19. (10sc,inc)x2 = 24
R 20. 24sc
R 21. (11sc,inc)x2 = 26
R 22. 26sc
R 23. (12sc,inc)x2 = 28
R 24. 28sc
R 25. (13sc,inc)x2 = 30
R 26. 30sc
R 27. BLO: 30sc
R 28. (3sc,dec)x6 = 24 Stuff/Riempire/Remplir!
R 29. (2sc,dec)x6 = 18
R 30. (1sc,dec)x6 = 12
R 31. 6dec. FO. Close the hole! Chiudere il buco! Fermer le trou!

Continue to row 27 in FLO/Continuare al giro 27 in FLO/Continuez au tour 27 en FLO:
R 1. (4sc,inc)x6 = 36
R 2. (5sc,inc)x6 = 42
R 3. (6sc,inc)x6 = 48 FO. Leave a long tail for sewing! – Lasciare una lunga coda per cucire! – Laissez une longue queue pour la couture!

Second Part – Seconda Parte – Deuxième Partie
With light purple and light yellow color yarn (alternating) – Con filo viola chiaro e giallo chiaro (alternare) – Avec du fil violet clair et jaune clair (alterner)
Start with light purple/Iniziare con viola chiaro/Commencer avec violet clair
R 1. 6sc in MR
R 2.-4. 6sc (3rds)
Change to light yellow/Cambiare con giallo chiaro/Changer avec jaune clair
R 5. 1inc, 5sc = 7
Change to light purple/Cambiare con viola chiaro/Changer avec violet clair
R 6.-8. 7sc (3rds)
R 9. 1inc, 6sc = 8
Change to light yellow/Cambiare con giallo chiaro/Changer avec jaune clair
R 10. 8sc
Change to light purple/Cambiare con viola chiaro/Changer avec violet clair
R 11.-12. 8sc (2rds)
R 13. 1inc, 7sc = 9
R 14. 9sc
Change to light yellow/Cambiare con giallo chiaro/Changer avec jaune clair
R 15. 9sc
Change to light purple/Cambiare con viola chiaro/Changer avec violet clair
R 16. 9sc
R 17. 1inc, 8sc = 10
R 18.-19. 10sc (2rds)
Change to light yellow/Cambiare con giallo chiaro/Changer avec jaune clair
R 20. 10sc
Change to light purple/Cambiare con viola chiaro/Changer avec violet clair
R 21. 1inc, 9sc = 11
R 22.-24. 11sc (3rds)
Change to light yellow/Cambiare con giallo chiaro/Changer avec jaune clair
R 25. 1inc, 10sc = 12
Change to light purple/Cambiare con viola chiaro/Changer avec violet clair
R 26.-28. 12sc (3rds)
R 29. 1inc, 11sc = 13
Change to light yellow/Cambiare con giallo chiaro/Changer avec jaune clair
R 30. 13sc
Change to light purple/Cambiare con viola chiaro/Changer avec violet clair
R 31.-32. 13sc (2rds)
R 33. 1inc, 12sc = 14
Change to light yellow/Cambiare con giallo chiaro/Changer avec jaune clair
R 34. 14sc
Change to light purple/Cambiare con viola chiaro/Changer avec violet clair
R 35.-36. 14sc (2rds)
R 37. 1inc, 13sc = 15
R 38. 15sc
Change to light yellow/Cambiare con giallo chiaro/Changer avec jaune clair
R 39. 15sc
Stuff/Riempire/Remplir.
Change to light purple/Cambiare con viola chiaro/Changer avec violet clair
R 40. 15sc
R 41. 1inc, 14sc = 16
R 42.-43. 16sc (2rds)
Change to light yellow/Cambiare con giallo chiaro/Changer avec jaune clair
R 44. 16sc
Change to light purple/Cambiare con viola chiaro/Changer avec violet clair
R 45. 1inc, 15sc = 17
R 46.-48. 17sc (3rds)
Change to light yellow/Cambiare con giallo chiaro/Changer avec jaune clair
R 49. 1inc, 16sc = 18
Change to light purple/Cambiare con viola chiaro/Changer avec violet clair
R 50.-53. 18sc (4rds)
Change to light yellow/Cambiare con giallo chiaro/Changer avec jaune clair
R 54. 18sc
From round 55 to round 141 alternate the colors purple and yellow (4 rounds with purple and one round with yellow). Stuff while you work!
Dal giro 55 al giro 141 si alternano i colori viola e giallo (4 giri con viola e un giro con giallo). Riempire mentre lavori!
Du tour 55 au tour 141 alternez les couleurs violet et jaune (4 tours avec du violet et un tour avec du jaune). Remplir pendant que vous travaillez!
With light purple/Con viola chiaro/Avec violet clair
R 142. (4sc, dec)x3 = 15
R 143. 15sc
R 144. (3sc, dec)x3 = 12
R 145. 12sc
Change to light yellow/Cambiare con giallo chiaro/Changer avec jaune clair
R 146. (2sc, dec)x3 = 9
Change to light purple/Cambiare con viola chiaro/Changer avec violet clair
R 147. 9sc
R 148. (1sc, dec)x3 = 6 Sew the hole! Cucire il buco! Coudre le trou!

Shell assembly – Assemblaggio conchiglia – Assemblage de la coquille

Sew the second part on the first part as in the photo!
Cucire la seconda parte sulla prima parte come nella foto!
Cousez la deuxième partie sur la première partie comme sur la photo!
Sew the light purple lace on the last round of the first part in FLO.
Cucire il pizzo viola chiaro all’ultimo giro della prima parte in FLO.
Coudre la dentelle violet clair sur le dernier tour de la première partie en FLO.

ASSEMBLY SNAIL – MONTAGGIO LUMACA – MONTAGE ESCARGOT

Sew the head on the foot./Cucire la testa sul piede/ Cousez la tête sur le pied.
Sew the shell onto the foot using the back loop of the last round of first part./Cucire la conchiglia sul piede usando l’asola posteriore dell’ultimo giro della prima parte./Cousez la coquille sur le pied en utilisant le brin arrière du dernier tour de la première partie.

Sew the hat on the back of the head and stuff lightly./Cucire il cappello sulla parte posteriore della testa e riempire molto legermente./ Cousez le chapeau à l’arrière de la tête et remplissez très légèrement.
Sew the nose between rows 11 and 13 from the head. Cut two disks with a diameter of 16mm in white felt and then glue the pupils and eyelashes as in the photo. Glue the eyes on the face and then embroider the mouth and the eyebrows with black thread. The cheeks are colored with a red pencil.Make a bow to the neck with satin ribbon 1.5 cm wide and 17 cm long.

Cucire il naso tra I giri 11 e 13 dalla testa. Tagliare due dischi con un diametro di 16mm in feltro bianco e poi incollare le pupille e le ciglia come nella foto. Incollare gli occhi sul viso e poi ricamare la bocca e le sopracciglia con filo nero. Le guance sono colorate con una matita rossa.Fare un fiocco al collo con il nastro di raso di larghezza 1.5 cm e lunghezza 17cm.

Cousez le nez entre les tours 11 et 13 de la tête. Coupez deux disques d’un diamètre de 16mm en feutre blanc puis collez les pupilles et les cils comme sur la photo. Collez les yeux sur le visage puis brodez la bouche et les sourcils avec du fil noir. Les joues sont colorées avec un crayon rouge. Faites un nœud au cou avec un ruban de satin de 1,5 cm de large et 17 cm de long.

We finished our pattern. You can send the finished pattern to me on facebook, instagram and pinterest.

https://www.facebook.com/amigurumi.sdk.today/
https://www.instagram.com/amigurumifreepatternss/
https://www.pinterest.com/crochetblogkb/

This sweet alpaca soft toy is made with the newest Durable Teddy yarn and with Durable Cosy extra fine.

Materials
Tapestry needle
Stitch marker
Row counter
Scissors
Restyle stuffing material
2 black safety eyes (10 mm)
Crochet hook
3 mm and 5 mm

Measurements
21cm/8,25in high, from bottom to top

Pattern info
Always work on the RS.
Rounds are not closed, work in spirals.

Snout
Using Yarn B and hook size 3 mm:
Round 1: Make a magic ring and work in the ring: 1ch, 6sc. – 6sc
Round 2: 2sc in each sc. – 12sc
Round 3: [1sc in next sc, 2sc in next sc] x 6. – 18sc
Round 4: [1sc in each of next 2sc, 2sc in next sc] x 6. – 24sc
Round 5: 1sc in each sc. – 24sc
Round 6: [1sc in each of next 3sc, 2sc in next sc] x 6. – 30sc
Rounds 7 – 8: 1sc in each sc. – 30sc
Round 9: Miss 2sc, 10dc in next sc, miss next 2sc, 1slst in each of next 6sc, miss next 2sc, 10dc in next sc, leave
remaing sts unworked. – 20dc, 6slsts
Cut yarn leaving a long tail and put snout aside.

Head and neck
Using Yarn A and hook size 5 mm:
Round 1: Make a magic ring and work in the ring: 1ch, 6sc. – 6sc
Round 2: 2sc in each sc. – 12sc
Round 3: [1sc in next sc, 2sc in next sc] x 6. – 18sc
Round 4: [1sc in each of next 2sc, 2sc in next sc] x 6. – 24sc
Rounds 5 – 9: 1sc in each sc. – 24sc
Round 10: [1sc in each of next 2sc, sc2tog in next 2sc] x 6. – 18sc
Round 11: [1sc in next sc, sc2tog in next 2sc] x 6. – 12sc
Rounds 12 – 18: 1sc in each sc. – 12sc
Cut yarn leaving a long tail. Stuff the head partly and determine the position of the snout. Attach both safety eyes
in the st where 10dc sts are made (attaching them through the snout as well as through the head). Stuff the head
completely and place the chenille threads in the neck. Sew the snout on to the head while stuffing the snout at the
same time. Weave in the end.

Ears (2x)
Using Yarn B and hook size 3 mm:
Round 1: Make a magic ring and work in the ring: 1ch, 6sc. – 6sc
Round 2: 1sc in each sc. – 6sc
Round 3: [1sc in next sc, 2sc in next sc] x 3. – 9sc
Round 4: [1sc in each of next 2sc, 2sc in next sc] x 3. – 12sc
Round 5: [1sc in each of next 3sc, 2sc in next sc] x 3. – 15sc
Round 6: [1sc in each of next 4sc, 2sc in next sc] x 3. – 18sc
Round 7: [1sc in each of next 5sc, 2sc in next sc] x 3. – 21sc
Round 8: [1sc in each of next 6sc, 2sc in next sc] x 3. – 24sc
Round 9: [1sc in each of next 7sc, 2sc in next sc] x 3. – 27sc
Fold the ear double and close with 13sc. Cut yarn leaving a long tail. Fold the ear double again and attach it on to
head with 6sts. Weave in the end.

Body
Using Yarn A and hook size 5 mm:
Round 1: Make a magic ring and work in the ring: 1ch, 6sc. – 6sc
Round 2: 2sc in each sc. – 12sc
Round 3: [1sc in next sc, 2sc in next sc] x 6. – 18sc
Round 4: [1sc in each of next 2sc, 2sc in next sc] x 6. – 24sc
Round 5: [1sc in each of next 3sc, 2sc in next sc] x 6. – 30sc
Rounds 6 – 15: 1sc in each sc. – 30sc
Round 16: [1sc in each of next 3sc, sc2tog in next 2sc] x 6. – 24sc
Round 17: 1sc in each sc. – 24sc
Round 18: [1sc in each of next 2sc, sc2tog in next 2sc] x 6. – 18sc
Stuff the body firmly.
Round 19: [1sc in next sc, sc2tog in next 2sc] x 6. – 12sc
Round 20: [sc2tog in next 2sc] x 6. – 6sc
Cut yarn leaving a long tail and pull the yarn through both loops of all 6 remaining sts. Pull yarn tightly and weave
in end.
Make sure to place the magic ring of the first round on the alpaca’s back side.
Sew the head on to the front part of the body while stuffing the neck.
Weave in the end.
Using Yarn C, embroider the nose.

Legs (4x)
Using Yarn C and hook size 3 mm:
Round 1: Make a magic ring and work in the ring: 1ch, 6sc. – 6sc
Round 2: 2sc in each sc. – 12sc
Round 3: [1sc in next sc, 2sc in next sc] x 6. – 18sc
Rounds 4 – 7: 1sc in each sc. – 18sc
Cut yarn, fasten off and weave in end.
Change to Yarn A and hook size 5 mm:
Round 8: [1sc in next sc, sc2tog in next 2sc] x 6. – 12sc
Rounds 9 – 13: 1sc in each sc. – 12sc
Cut yarn leaving a long tail and stuff the legs firmly.
Sew the legs on to the bottom part of the body and weave in the end.

Tail
Using Yarn A and hook size 5 mm:
Round 1: Make a magic ring and work in the ring: 1ch, 6sc. – 6sc
Rounds 2 – 4: 1sc in each sc. – 6sc
Cut yarn leaving a long tail, stuff the tail gently and sew the tail on to the back side of the body.
Weave in the end.

We finished our pattern. You can send the finished pattern to me on facebook, instagram and pinterest.

https://www.facebook.com/amigurumi.sdk.today/
https://www.instagram.com/amigurumifreepatternss/
https://www.pinterest.com/crochetblogkb/

More Amigurumi Alpaca Ideas

NECESSARY MATERIALS
Amigurumi Rope (Snowball Organica – For Main Parts – Yellow, Light Green, Dark Green Light Brown)
Amigurumi Yarn (Snowball Organica – For Embroidery – Orange, Black, White)
2.00 mm Crochet
6 mm Security Locked Eyes
Sewing needle and scissors
Fiber filling material

HEAD and BODY (As One Piece)
We start knitting with Yellow Color Thread.
01: Make a Magic Ring and 6X inside it (6)
02: [1 inc] * 6 (12)
03: [1 sc, 1 inc] * 6 (18)
04: [2 sc, 1 inc] * 6 (24)
05 – 07: 24 sc (3 Rows Same) (24)
Security locked eyes will be placed between rows 07 and 08 with 6 loops spaced between them.
08: [3 sc, 1 inc] * 6 (30)
09 – 12: 30 sc (4 Rows Same) (30)
We change thread and continue to knit with Green Color Thread.
13: [4 sc, 1 inc] * 6 (36)
14 – 27: 36 sc (14 Rows Same) (36)
28: [4 sc, 1 dec] * 6 (30)
29: [3 sc, 1 dec] * 6 (24)
30: [2 sc, 1 dec] * 6 (18)
31: [1 sc, 1 dec] * 6 (12)
32: [1 dec] * 6 (6)
We finish.
We process Beak with Orange Color Thread between 09 and 11 rows.

WINGS (4 Pieces)
We knit with Green Color Thread.
01: Make a Magic Ring and 6 sc in it (6)
02: [1 inc] * 6 (12)
03: [1 sc, 1 inc] * 6 (18)
04: [2 sc, 1 inc] * 6 (24)
05: [3 sc, 1 inc] * 6 (30)
06: [4 sc, 1 inc] * 6 (36)
We finish.

ADDING THE WINGS
After sewing the wings together, we embroider.
We sew the wings between the 13th and 27th rows so that they are on both sides of the Body.
Pay attention to the planting direction of the wings by examining the pictures.

QUEUE
We Knit with Dark Green Color Thread.
01: Make Magic Ring and into it: 6 sc (6)
02: [1 sc, 1 inc] * 3 (9)
03 – 04: 9 sc (2 Rows Same) (9)
05: [2 sc, 1 inc] * 3 (12)
06 – 07: 12 sc (2 Rows Same) (12)
08: [3 sc, 1 inc] * 3 (15)
09 – 13: 15 sc (5 Rows Same) (15)
We change the thread and continue to knit with a Light Green Thread.
14 – 18: 15 sc (5 Rows Same) (15)
Fill with Fiber without advancing to the end.
19: We fold it in half and knit with 7 sc. (6)
We sew the tail to the Body over the 25th row.

FEET
We Knit With Light Brown Thread.
01: Make Magic Ring and into it: 4 sc (DO NOT CLOSE the Ring) (4)
02: 4 ch Make it back: 3 sc into the chain, 1 sl-st into the Magic Ring
03: 4 ch Make Back: 3 sc into the chain, 1 sl-st into the Magic Ring
04: 4 ch Make Back: 3 sc into the chain, 1sl-st into the Magic Ring
05: Make 1 sc into the Magic Ring and Close the Ring
We sew the legs to the Trunk between rows 27 and 28.

We finished our pattern. You can send the finished pattern to me on facebook, instagram and pinterest.

https://www.facebook.com/amigurumi.sdk.today/
https://www.instagram.com/amigurumifreepatternss/
https://www.pinterest.com/crochetblogkb/

Amigurumi Patterns Made With This Recipe

Materials
YarnArt Jeans or Alize Cotton Gold (or you can use a different cotton thread)
Thread colors beige, dark brown, green, red, white
2 – 3 mm crochet hook
Needle for sewing
Fiber
Scissors
2 black beads for eyes

Head
1: 6 sc into the magic ring
2: inc = 12 sc in each loop
3: (1 sc, 1 inc) * 6 = 18 sc
4: (2 sc, 1 inc) * 6 = 24 sc
5: (3 sc, 1 inc) * 6 = 30 sc
6: (4 sc, 1 inc) * 6 = 36 sc
7: (5 sc, 1 inc) * 6 = 42 sc
8-13: 42 sc
14: (6 sc, 1 inc) * 6 = 48 sc
15: (7 sc, 1 inc) * 6 = 54 sc
16-21: 54 sc
22: (7 sc, 1 dec) * 6 = 48 sc
23: (6 sc, 1 dec) * 6 = 42 sc
24: (5 sc, 1 dec) * 6 = 36 sc
25: (4 sc, 1 dec) * 6 = 30 sc
26: (3 sc, 1 dec) * 6 = 24 sc
27: (2 sc, 1 dec) * 6 = 18 sc
28: (1 sc, 1 dec) * 6 = 12 sc

Body
1: 6 sc into the magic ring
2: inc = 12 sc in each loop
3: (1 sc, 1 inc) * 6 = 18 sc
4: (2 sc, 1 inc) * 6 = 24 sc
5: (3 sc, 1 inc) * 6 = 30 sc
6: (4 sc, 1 inc) * 6 = 36 sc
7: (5 sc, 1 inc) * 6 = 42 sc
8: (6 sc, 1 inc) * 6 = 48 sc
9-13: 48 sc
14: Change the color of the thread, sinking in the back loops 48 sc
We change one color in 2 rows. With green and white.
15-17: 48 sc
18: (6 sc, 1 dec) * 6 = 42 sc
19-21: 42 sc
22: (5 sc, 1 dec) * 6 = 36 sc
23-25: 36 sc
26: (4 sc, 1 dec) * 6 = 30 sc
27-29: 30 sc
30: (3 sc, 1 dec) * 6 = 24 sc
31: 24 sc
Let’s fix our rope to the loops in the 14th round. Let’s make sc in all loops.

Legs (2 pieces)
1: 6 sc into the magic ring
2: 2 sc in each loop (12)
3: (1 sc, 1 inc) * 6 = 18 sc
4: (2 sc, 1 inc) * 6 = 24 sc
5: 24 sc by sinking into the back loops
6-7: 24 sc
8: (1 sc, 1 inc) * 6 = 18 sc
change the color of the thread.
9-11: 18 sc
12: (1 sc, 1 dec) * 6 = 12 sc
13-22: 12 sc
23: (1 sc, 1 inc) * 6 = 18 sc
24: 18 sc
25: (2 sc, 1 inc) * 6 = 24 sc

Handles (2 pcs)
1: 6 sc into the magic ring
2: 2 sc in each loop (12)
3-7: 12 sc

Finger
1: 6 sc into the magic ring
2-4: 6 sc
Let’s continue by combining the hand with the finger.
8: 18 sc
9: (1 sc, 1 dec) * 6 = 12 sc
10: 12 sc
change the color of the thread.
11: 12 sc
12: 12 sc by sinking in the back loops
13-30: 12 sc
You can continue with the remaining parts by watching the video.
Our cute deer are very beautiful.

Please when you finish this pattern, don’t forget to share it with me on facebook and Pinterest.

Amigurumi Patterns Made With This Recipe

Materials
Rope in the color you like
Fiber
Eye
Needle
2 – 2.5 mm crochet hook

Head
1: 6 sc into the magic ring
2: 2 sc in each loop (12)
3: (1 sc, 1 inc) * 6 = 18 sc
4: (2 sc, 1 inc) * 6 = 24 sc
5: (3 sc, 1 inc) * 6 = 30 sc
6: (4 sc, 1 inc) * 6 = 36 sc
7: (5 sc, 1 inc) * 6 = 42 sc
8: (6 sc, 1 inc) * 6 = 48 sc
9-15: 48 sc
16: (7 sc, 1 inc) * 6 = 54 sc
16 -21: 54 sc
22: (7 sc, 1 dec) * 6 = 48 sc
23: (6 sc, 1 dec) * 6 = 42 sc
24: (5 sc, 1 dec) * 6 = 36 sc
25: (4 sc, 1 dec) * 6 = 30 sc
26: (3 sc, 1 dec) * 6 = 24 sc
27: (2 sc, 1 dec) * 6 = 18 sc
Start filling.
28: (1 sc, 1 dec) * 6 = 12 sc
29: 6 dec = 6 sc

Nose
1: 7 ch, From second ch ‘, 5 sc, 1 inc, 5 sc = 12 sc
2: 2 inc, 3 sc, 3 inc, 3 sc, 1 inc = 18 sc
3: 2 inc, 6 sc, 3 inc, 6 sc, 1 inc = 24 sc
4: 2 inc, 9 sc, 3 inc, 9 sc, 1 inc = 30 sc
5: 2 inc, 12 sc, 3 inc, 12 sc, 1 inc = 36 sc
6: 2 inc, 15 sc, 3 inc, 15 sc, 1 inc = 42 sc
7-11: 42 sc
12: (5 sc, 1 dec) * 6 = 36 sc

Nostril (2 pcs)
1: 4 sc into the magic ring
2: inc = 8 sc in each loop
3-4: 8 sc

Body
1: 6 sc into the magic ring
2: inc = 12 sc in each loop
3: (1 sc, 1 inc) * 6 = 18 sc
4: (2 sc, 1 inc) * 6 = 24 sc
5: (3 sc, 1 inc) * 6 = 30 sc
6: (4 sc, 1 inc) * 6 = 36 sc
7: (5 sc, 1 inc) * 6 = 42 sc
8: (6 sc, 1 inc) * 6 = 48 sc
9: (7 sc, 1 inc) * 6 = 54 sc
10: (8 sc, 1 inc) * 6 = 60 sc
11: (9 sc, 1 inc) * 6 = 66 sc
12-16: 66 sc
17: (9 sc, 1 dec) * 6 = 60 sc
18-19: 60 sc
20: (8 sc, 1 dec) * 6 = 54 sc
21-23: 54 sc
24: (7 sc, 1 dec) * 6 = 48 sc
25-27: 48 sc
28: (6 sc, 1 dec) * 6 = 42 sc
29-31: 42 sc
32: (5 sc, 1 dec) * 6 = 36 sc
33-35: 36 sc
36: (4 sc, 1 dec) * 6 = 30 sc
37-41: 30 sc

Feet (2 pieces)
1: 6 sc into the magic ring
2: 2 sc in each loop (12)
3: (1 sc, 1 inc) * 6 = 18 sc
4: (2 sc, 1 inc) * 6 = 24 sc
5-10: 24 sc
11: (2 sc, 1 dec) * 6 = 18 sc
12: (1 sc, 1 dec) * 6 = 12 sc
13-20: 12 sc
21: (1 sc, 1 inc) * 6 = 18 sc
22: 18 sc
23: (2 sc, 1 inc) * 6 = 24 sc
24: 24 sc
25: (3 sc, 1 inc) * 6 = 30 sc
26: 30 sc
27: (3 sc, 1 dec) * 6 = 24 sc
28: (2 sc, 1 dec) * 6 = 18 sc
29: (1 sc, 1 dec) * 6 = 12 sc
30: 6e = 6 sc

Front Legs (2 pieces)
1: 6 sc into the magic ring
2: 2 sc in each loop (12)
3: (1 sc, 1 inc) * 6 = 18 sc
4-7: 18 sc
8: (1 sc, 1 dec) * 6 = 12 sc
9-19: 12 sc

Queue
1: 6 sc into the magic ring
2: 2 sc in each loop (12)
3-7: 12 sc
8: (1 sc, 1 inc) * 6 = 18 sc
9-13: 18 sc
14: (2 sc, 1 inc) * 6 = 24 sc
15-19: 24 sc
20: (3 sc, 1 inc) * 6 = 30 sc
21-23: 30 sc
24: (4 sc, 1 inc) * 6 = 36 sc
25: (5 sc, 1 inc) * 6 = 42 sc
26: (6 sc, 1 inc) * 6 = 48 sc
Let’s sew the tail between rows 2-15.

Head Barb (3 pcs)
1: 4 sc into the magic ring
2: inc = 8 sc in each loop
3-4: 8 sc

Trunk Spines (3 pcs)
1: 6 sc into the magic ring
2: 2 sc in each loop (12)
3-5: 12 sc
We have completed our dinosaur. You can send your finished photos to me on facebook and pinterest.

Amigurumi Patterns Made With This Recipe

Materials
Color thread you want.
Needle
Scissors
Fiber
Sequence determiner
Eye

Body
1: 6 sc into the magic ring
2: 2 sc in each loop (12)
3: (1 sc, 1 inc) * 6 = 18 sc
4: (2 sc, 1 inc) * 6 = 24 sc
5: (3 sc, 1 inc) * 6 = 30 sc
6: (4 sc, 1 inc) * 6 = 36 sc
7: (5 sc, 1 inc) * 6 = 42 sc
8: (6 sc, 1 inc) * 6 = 48 sc
9: (7 sc, 1 inc) * 6 = 54 sc
10-13: 54 sc
14: 11 sc with the same color, 1 sc with the red, 42 sc with the same color = 54 sc
15: 10 sc with the same color, 3 sc with the red, 41 sc with the same color = 54 sc
16: 9 sc with same color, 6 sc with red, 39 sc with same color = 54 sc
17: 8 sc with same color, 8 sc with red, 38 sc with same color = 54 sc
18-19: 7 sc with the same color, 10 sc with the red, 37 sc with the same color = 54 sc
20: 7 sc with same color, 5 sc with red, 1 sc with same color, 5 sc with red, 36 sc with same color = 54 sc
21: 7 sc with the same color, with red (1 dec, 2 sc), 3 sc with the same color, with red (2 sc, 1 dec), with the same color (7 sc, 1 dec) * 4 = 48 sc
22: 8 sc with same color, 1 sc with red, 5 sc with same color, 1 sc with red, 33 sc with same color = 48 sc
23-24: 48 sc
25: (6 sc, 1 dec) * 6 = 42 sc
26-27: 42 sc
28: (5 sc, 1 dec) * 6 = 36 sc
29-30: 36 sc
31: (4 sc, 1 dec) * 6 = 30 sc
32-34: 30 sc
35: (3 sc, 1 dec) * 6 = 24 sc
36-52: 24 sc
53: 8 sc, turn
54: 1 ch, skip 1 sc, turn 13 sc
55: 1 ch, skip 1 sc, turn 12 sc
56: 1 ch, skip 1 sc, turn 11 sc
57: 1 ch, skip 1 sc, turn 10 sc

Head
1: 6 sc into the magic ring
2: 2 sc in each loop (12)
3: (1 sc, 1 inc) * 6 = 18 sc
4: (2 sc, 1 inc) * 6 = 24 sc
5: (3 sc, 1 inc) * 6 = 30 sc
6: 30 sc
7: (4 sc, 1 inc) * 6 = 36 sc
8: 36 sc
9: (5 sc, 1 inc) * 6 = 42 sc
10-12: 42 sc
Change color
13-15: 42 sc
16: (5 sc, 1 dec) * 6 = 36 sc
17-25: 36 sc
26: (4 sc, 1 dec) * 6 = 30 sc
27: 30 sc
28: (3 sc, 1 dec) * 6 = 24 sc
29: (2 sc, 1 dec) * 6 = 18 sc
Start filling.
30: (1 sc, 1 dec) * 6 = 12 sc
41: 6 dec = 6 sc
Finish.

Ears (2 pieces)
1: 6 sc into the magic ring
2: (1 sc, 1 inc) * 3 = 9 sc
3: (2 sc, 1 inc) * 3 = 12 sc
4: (3 sc, 1 inc) * 3 = 15 sc
5: (4 sc, 1 inc) * 3 = 18 sc
6: (5 sc, 1 inc) * 3 = 21 sc
7-13: 21 sc
14: (5 sc, 1 dec) * 3 = 18 sc
15: (4 sc, 1 dec) * 3 = 15 sc
16: (3 sc, 1 dec) * 3 = 12 sc
Let’s leave the rope a little long to sew.

Horns (2 pieces)
1: 6 sc into the magic ring
2: 2 sc in each loop (12)
3: (1 sc, 1 inc) * 6 = 18 sc
4-6: 18 sc
7: (1 sc, 1 dec) * 6 = 12 sc
8: (2 sc, 1 dec) * 3 = 9 sc, we continue with the color you want.
9-14: 9 sc, let’s leave the rope a little long to sew.

Feet (2 pieces)
1: 6 sc into the magic ring
2: 2 sc in each loop (12)
3: (1 sc, 1 inc) * 6 = 18 sc
4: (2 sc, 1 inc) * 6 = 24 sc
5: (3 sc, 1 inc) * 6 = 30 sc
6-8: 30 sc
9: (3 sc, 1 dec) * 6 = 24 sc
10: (2 sc, 1 dec) * 6 = 18 sc
11: (1 sc, 1 dec) * 6 = 12 sc
12–38: 12 sc by changing color

Front Legs (2 pieces)
1: 6 sc into the magic ring
2: 2 sc in each loop (12)
3: (1 sc, 1 inc) * 6 = 18 sc
4: (2 sc, 1 inc) * 6 = 24 sc
5: (3 sc, 1 inc) * 6 = 30 sc
6-8: 30 sc
9: (3 sc, 1 dec) * 6 = 24 sc
10: (2 sc, 1 dec) * 6 = 18 sc
11: (1 sc, 1 dec) * 6 = 12 sc
12–32: 12 sc by changing color
We finished our giraffe. You can send your pictures to me via pinterest and facebook.

Amigurumi Patterns Made With This Recipe

Materials
Color thread you want.
Needle
Scissors
Fiber
Sequence determiner
Eye

Head
We start duck making with head making.
We start with the magic ring.
1) 6sc
2) Knit a total of 12 sc to be double-dipped into each hole.
3) (1 sc, 1 inc) 18 sc
4) (2 sc, 1 inc) 24 sc
5) (3 sc, 1 inc) 30 sc
6) (4 sc, 1 inc) 36 sc
7) (5 sc, 1 inc) 42 sc
8) (6 sc, 1 inc) 48 sc
9) (7 sc, 1 inc) 54 sc
10-19) Knit 10 rows of 54 sc.
There will be 7 sc between the two eyes on rows 15-16.
20) (7 sc, 1 dec) 48 sc
21) (6 sc, 1 dec) 42 sc
22) (5 sc, 1 dec) 36 sc
23) (6 sc, 1 dec) 30 sc
24) (5 sc, 1 dec) 24 sc
25) (4 sc, 1 dec) 18 sc
Fill it with fiber.

Beak
We continue duck making with beak making.
1) Pull 9 chains (9 ch)
2) (7 sc, 1 inc) Repeat twice, knit a total of 18 sc.
3-6) Knit four rows of 18 sc.
Leave the rope long and cut it. Sew between 15 and 20 rows of the head.

Body
We continue the duck making with the trunk.
We start with the magic ring.
1) 6 sc
2) Knit a total of 12 sc to be double-dipped into each hole
3) (1 sc, 1 inc) 18 sc
4) (2 sc, 1 inc) 24 sc
5) (3 sc, 1 inc) 30 sc
6) (4 sc, 1 inc) 36 sc
7) (5 sc, 1 inc) 42 sc
8) (6 sc, 1 inc) 48 sc
9-13) five rows between rows, 48 ​​sc.
14) (4 sc, 1 dec) 40 sc
15) 40 sc
16) (2 sc, 1 dec) 30 sc
17) 30 sc
18) (1 sc, 1 dec) 20 sc
19) 20 sc
20) (8 sc, 1 dec) 18 sc
21) 18 sc

Foot (2 Pieces)
We continue duck making with foot making.
In the dec part of the feet, 3-dec, and 3-inc. So when inc is made, 3 increments are made in the same place. When a dec is done, 3 stitches are removed and subtracted at once. The inc transaction is shown as (inc 3), the dec transaction (dec 3).
1) 6 sc into the magic ring
2) (inc 3), 1 sc, repeat 3 times will total 12 sc.
3) 1 sc, (inc 3), 3 sc, repeat 2 times, (inc 3), 2 sc will total 18 sc.
4) 2 sc, (inc 3), 7 sc, repeat 2 times (inc 3), 4 sc will total 30 sc.
5) 4 sc, (inc 3), 9 sc, repeat 2 times, (inc 3), 5 sc will total 36 sc.
6) There will be one sc in each loop, 36 sc in total.
7) There will be one sc in each loop, 36 sc in total.
8) There will be 4 sc, (dec 3), 9 sc, (dec 3), 17 sc, 32 sc in total.
9) There will be 3 sc, (dec 3), 7 sc, (dec 3), 16 sc, 28 sc in total.
10) There will be 2 sc, (dec 3), 5 sc, (dec 3), 15 sc, total 24 sc.
11) There will be 1 sc, (dec 3), 3 sc, (dec 3), 14 sc, total 20 sc.
12) There will be (dec 3), 1 sc, (dec 3), 13 sc, 16 sc in total.
13) It will be (dec 3), 13 sc, 14 sc in total.
14-16) 3 rows will be 14 sc.
Feet are gone. Fill it with fiber and sew it to the body.

Wing (2 Pieces)
We continue duck making with wings.
1) 6 sc into the magic ring
2) Dip double in each loop. It will be 12 sc.
3-4) Knit 12 sc.
5) 1 sc, 1 inc (will total 18 sc.)
6-7) will be 18 sc.
8) 2 sc, 1 inc, (will total 24 sc.)
9-10) 24 sc
11) 3 sc, 1 inc, (will total 30 sc.)
12-13) will be 30 sc.
14) 1 dec, 1 sc (20 sc total)
15-16) will be 20 sc.
17) Make 10 dec (total will be 10 sc.)
18-19) will be 10 sc.
Sew to the side of the body without stuffing the inside.

Hair Ring
Pull 11 chains.
From the 2nd chain, dcv will be made to the same hole.
It will be sewn in the middle of the head.

Collar
We continue duck making with neck collar construction.
Pull 11 chains.
From the 2nd chain, knit 10 sc.
From this row, pull 1 chain in each turn and knit the dense needles as blo. It is knitted in the form of BLO to give a rubbery appearance.
We adjust it according to the length of the neck, how many rows will be.

Amigurumi Patterns Made With This Recipe