Materials
YarnArt Jeans yarn
2.0 mm crochet hook
Black beads for eyes
Some buttons for decoration
Black and pink embroidery floss
Sewing thread, needle and scissors
Fiberfill

Height: 20 cm (7.8”).

Abbreviations:
R – row
ch – chain
st – stitch
sl st – slip stitch
sc – single crochet
dc – double crochet
inc – increase (2 sc in one stitch)
dec – decrease (2 sc together)
BLO – back loop only
FLO – front loop only
[…] – number of stitches you should have at the end of the row
(…) – repeat whatever is between the brackets the given number of times

Amigurumi doll free pattern

Legs and body
Left leg
With beige color:
R 1: 6 sc in magic ring [6]
R 2: (inc) repeat 6 times [12]
R 3: (3 sc, inc) repeat 3 times [15]
R 4-23: 15 sc (20 rows)
R 24: (4 sc, inc) repeat 3 times [18]
R 25: 18 sc, 1 ch
Fasten off.

Right leg
With beige color:
R 1: 6 sc in magic ring [6]
R 2: (inc) repeat 6 times [12]
R 3: (3 sc, inc) repeat 3 times [15]
R 4-23: 15 sc (20 rows)
R 24: (4 sc, inc) repeat 3 times [18]
R 25: 18 sc
Do not fasten off.
Make 2 ch and join with the left leg.

R 26: 1 sc in last st on R 25 of the left leg, 18 sc on the left leg, 2 sc in 2 ch, 1 sc in last st on R 25 of the right leg, 18 sc on the right leg, 2 sc in 2 ch (opposite side) [42]
Beginning of the new row is on the back side of the doll.
R 27-34: 42 sc (8 rows)
Change to sweater color:
R 35: 42 sc
R 36: BLO 42 sc
R 37-47: 42 sc (11 rows)
R 48: (5 sc, dec) repeat 6 times [36]
R 49: (4 sc, dec) repeat 6 times [30]
R 50: (3 sc, dec) repeat 6 times [24]
R 51: (2 sc, dec) repeat 6 times [18]
Change to beige color:
R 52-55: 18 sc (4 rows)
Fasten off and leave a long tail for sewing.

Head
With beige color:
R 1: 6 sc in magic ring [6]
R 2: (inc) repeat 6 times [12]
R 3: (1 sc, inc) repeat 6 times [18]
R 4: (2 sc, inc) repeat 6 times [24]
R 5: (3 sc, inc) repeat 6 times [30]
R 6: (4 sc, inc) repeat 6 times [36]
R 7: (5 sc, inc) repeat 6 times [42]
R 8-18: 42 sc (11 rows)
R 19: (5 sc, dec) repeat 6 times [36]
R 20: (4 sc, dec) repeat 6 times [30]
R 21: (3 sc, dec) repeat 6 times [24]
R 22: (2 sc, dec) repeat 6 times [18]
1 sl st, 1 ch.
Fasten off.

Insert 2-3 cotton swab into the neck to strengthen it. One end of cotton swab is inside the neck and body, the opposite end will be in the head.
Sew head to the body.

Arms (make 2)
R 1: 6 sc in magic ring [6]
2: (1 sc, inc) repeat 3 times [9]
3: (2 sc, inc) repeat 3 times [12]
4-9: 12 sc (6 rows)
Change to sweater color:
10-22: 12 sc (13 rows)
Fold the top opening flat and 5 sc through both sides.
Fasten off and leave a long tail for sewing.

Skirt
With skirt color:
Join yarn to a front loop of R 36 of the body and crochet as follows.
R 1: FLO 1 ch, 42 sc, 1 sl st
R 2: 1 ch, (5 sc, inc) repeat 7 times, 1 sl st [49]
R 3-12: 1 ch, 49 sc, 1 sl st (9 rows)
Fasten off.

Hat
R 1: 6 sc in magic ring [6]
R 2: (inc) repeat 6 times [12]
R 3: (1 sc, inc) repeat 6 times [18]
R 4: (2 sc, inc) repeat 6 times [24]
R 5: (1 sc, inc) repeat 12 times [36]
R 6: (5 sc, inc) repeat 6 times [42]
R 7: BLO 42 sc
R 8-10: 42 sc (3 rows)
R 11: (13 sc, inc) repeat 3 times [45]
R 12: 45 sc
R 13: (14 sc, inc) repeat 3 times [48]
R 14: 48 sc
R 15: (15 sc, inc) repeat 3 times [51]
R 16: 51 sc, 1 sl st
R 17: 2 ch, 2 dc in every stitch to the end of row, 1 sl st [102]
R 18: 2 ch, 102 dc
R 19: reverse sc
Fasten off.

Hair
Attach 6 strands on R 1 (one strand in every st).
Attach 18 strands on R 3 (one strand in every st).
Attach 30 strands on R 5 (one strand in every st).
Attach strands on the back of head (one strand in every second st, skip one row between strands). Make four rows.
Attach some strands on the sides (in every row).

Assembly
Sew arms between R 47 and R 48 of the body.
Sew black beads for eyes between R 10 and R 11 of the head at the distance of 6 sc from each other.
Embroider mouth between R 16 and R 17 with pink floss.
Embroider eylashes with black floss.
Sew buttons on the sweater.

We finished our pattern. You can send the finished pattern to me on facebook, instagram and pinterest.

https://www.facebook.com/amigurumi.sdk.today/
https://www.instagram.com/amigurumifreepatternss/
https://www.pinterest.com/crochetblogkb/

More Amigurumi Doll İdeas

Material
1) Yarn: sport or DK light weight yarn (I used Jeans from YarnArt).
2) Hook: Size 2.5mm
3) Polyester fiberfill
4) Stitch markers

Abbreviations:
ch: chain
sc: single crochet
inc: increase
dec: decrease
sl st: slip stitch
blo: back loops only.
dc: double crochet
hdc: half double crochet
inc – dc : increase double crochet

Amigurumi bee free pattern

HEAD
Use skin color yarn
Rnd 1: 6 sc in the magic ring (6)
Rnd 2: 6 inc (12)
Rnd 3: (1 sc, inc)6 (18)
Rnd 4: (inc, 2 sc)6 (24)
Rnd 5: (3 sc, inc)6 (30)
Rnd 6: 1 sc, inc, (4 sc, inc)5, 3 sc (36)
Rnd 7: (5 sc, inc)6 (42)
Rnd 8: 2 sc, inc, (6x, inc)5, 4 sc (48)
Rnd 9: (7 sc, inc)6 (54)
Rnd 10: 3 sc, inc, (8 sc, inc)5, 5 sc (60)
Rnd 11: (9 sc, inc)6 (66)
Rnd 12-22: 66 sc (11 rounds) (66)
Rnd 23: (9 sc, dec)6 (60)
Rnd 24: 60 sc (60)
Rnd 25: (8 sc, dec)6 (54)
Rnd 26: (7 sc, dec)6 (48)
Rnd 27: (6 sc, dec)6 (42)
Rnd 28: (5 sc, dec)6 (36)
Rnd 29: (4 sc, dec)6 (30)
Rnd 30: (3 sc, dec)6 (24)
Rnd 31: (2 sc, dec)*6, sl st. (18)
Fasten off the yarn. Stuff the head.

HAT
Use yellow yarn
Rnd 1: 6 sc in the magic ring (6)
Rnd 2: 6 inc (12)
Rnd 3: (1 sc, inc)6 (18)
Rnd 4: (inc, 2 sc)6 (24)
Rnd 5: (3 sc, inc)6 (30)
Rnd 6: 1 sc, inc, (4 sc, inc)5, 3 sc (36)
Rnd 7: (5 sc, inc)6 (42)
Rnd 8: 2 sc, inc, (6sc, inc)5, 4 sc (48)
Rnd 9: (7 sc, inc)6 (54)
Rnd 10: 3 sc, inc, (8 sc, inc)5, 5 sc (60)
Rnd 11-22: 60 sc (12 rounds) (60)

BRIM
Rnd 23: (BLO) 60 inc – dc (120)
Rnd 24: 120 sc, sl st. (120)
Fasten off the yarn.

BEARD (make 2)
Use black yarn.
Rnd 1: 6 sc in the magic ring (6)
Rnd 2: 6 inc (12)
Rnd 3-5: 12 sc (3 rounds) (12)
Rnd 6: (2 sc, dec)3 (9)
Stuff the beard.
Rnd 7: (1 sc, dec)3 (6)
Rnd 8-16: 6 sc (9 rounds) (6)
Rnd 17: 6 sc, sl st. (6)
Fasten off the yarn, leaving a tail for sewing. Do not stuff.

SIDEBURNS (make 1)
Use brown yarn
Make 16 ch, start the second ch from hook: [1 sc, 1hdc, 1 dc, 1 hdc, 1 sl st]3. Fasten off the yarn, leaving a tail for sewing.

LEG (make 2)
Use black yarn
Rnd 1: 6 sc in the magic ring (6)
Rnd 2 :(1 sc, inc)3 (9)
Rnd 3: (inc, 2 sc)3 (12)
Rnd 4: (3 sc, inc)3 (15)
Rnd 5: (4 sc, inc)*3, sl st. (18)
Make the second leg, change yellow yarn, join first leg to make the body.

BODY
Crochet 3 rounds in yellow followed by 2 rounds in black until the end.
Rnd 1: 36 sc (36)
Rnd 2: (5 sc, inc)6 (42)
Rnd 3-10: 42 sc (8 rounds) (42)
Rnd 11: (5 sc, dec)6 (36)
Rnd 12: 36 sc (36)
Rnd 13: (4 sc, dec)6 (30)
Rnd 14: 30 sc (30)
Rnd 15: (3 sc, dec)6 (24)
Rnd 16: 24 sc (24)
Rnd 17: (2 sc, dec)6 (18)
Rnd 18: 18 sc, sl st. (18)
Fasten off the yarn, leaving a tail for sewing. Stuff the body.

ARM (make 2)
Use skin color yarn
Rnd 1: 6 sc in the magic ring (6)
Rnd 2: (1 sc, inc)3 (9)
Change yellow yarn
Rnd 3-10: 9 sc (8 rounds) (9)
Rnd 11: 9 sc, sl st. (9)
Fasten off the yarn, leaving a tail for sewing. Do not stuff.
Fold the top of the arm, sew the 2 opposed stitches.

SWING (make 2)
Use white yarn
Rnd 1: 6 sc in the magic ring (6)
Rnd 2 :(1 sc, inc)3 (9)
Rnd 3: (inc, 2 sc)3 (12)
Rnd 4: (3 sc, inc)3 (15)
Rnd 5: (4 sc, inc)3 (18)
Rnd 6-11: 18 sc (6 rounds) (18)
Rnd 12: (4 sc, dec)3 (15)
Rnd 13: 15 sc (15)
Rnd 14: (3 sc, dec)3 (12)
Rnd 15: 12 sc, sl st. (12)
Fasten off the yarn, leaving a tail for sewing. Do not stuff.
Fold the top of the swing, sew the 2 opposed stitches

We finished our pattern. You can send the finished pattern to me on facebook, instagram and pinterest.

https://www.facebook.com/amigurumi.sdk.today/
https://www.instagram.com/amigurumifreepatternss/
https://www.pinterest.com/crochetblogkb/

More Amigurumi Bee İdeas

Materials:
• Cotton yarn (look under used yarns)
• Hook: 2,5 mm & 3,5 mm
• Yarn needle
• Scissors
• Stuffing/poly fill
• safety eyes 10 mm

TECHNIQUE:
• This toy is crocheted in spiral, where you don’t join the rounds.
• The patches on the dress and the dress flap is crocheted in rows.

USED YARNS:
Doll:
• 50 gr drops safran (100% cotton; 50g ≈ 160 m) in unicolor 18 natur
• 30 gr drops safran (100% cotton; 50g ≈ 160 m) in unicolor 50 light blue
• 20 gr drops safran (100% cotton; 50g ≈ 160 m) in unicolor 10 light yellow
• 10 gr drops safran (100% cotton; 50g ≈ 160 m) in unicolor 11 dark yellow
• 10 gr drops safran (100% cotton; 50g ≈ 160 m) in unicolor 31 green
• Scrap of drops safran (100% cotton; 50g ≈ 160 m) in unicolor 01 light pink
• Scrap of drops safran (100% cotton; 50g ≈ 160 m) in unicolor 05 purple
• Scrap of drops safran (100% cotton; 50g ≈ 160 m) in unicolor 16 black
Hair:
• 25 g drops kid silk (75% mohair og 25% silke; 25g ≈ 200 m) in unicolor 33 rust
• Scrap of drops Melody (71% Alpaca, 25% wool, 4% Polyamid; 50g ≈ 140 m) in unicolor 14 light yellow

MEASUREMENTS:
Approx 38×11 cm. Note: If you use other types of yarn or hook size than stated here, the size and look of
the toy will vary.

ABBREVIATIONS:
• st. – stitch
• ch – chain
• MR – magic ring
• sc – single crochet
• hdc – half double crochet
• flo – front loop only
• blo -back loop only
• inc. – increase, 2 sc in same stitch
• dec. – decrease, 2 sc together use invisible decrease
• – – repeat between ** round out
• each round is marked with (st. count) at the end

Amigurumi doll free pattern

HEAD
Use your white yarn and hook 2,5 mm. After placing the eyes you just stuff as you go.
The head should be firmly stuffed.
1) 6 sc in mr (6)
2) inc. (12)
3) 1 sc, inc. (18)
4) 2 sc, inc. (24)
5) 3 sc, inc. (30)
6) 4 sc, inc. (36)
7) 5 sc, inc. (42)
8) 6 sc, inc. (48)
9) 7 sc, inc. (54)
10) 8 sc, inc. (60)
11) 9 sc, inc. (66)
12-23) (12 rounds) 1 sc in each st. (66)
24) 21 sc, inc. (69)
25) 1 sc in each st. (69)
26) 11 sc, inc., (22 sc, inc.) x 2, 11 sc (72)
27-32) (6 rounds) 1 sc in each st(72)
Place eyes between round 25-26. with 17 st in between, counted on round 24.
33) 6 sc, dec. (63)
34) 5 sc, dec. (54)
35) 4 sc, dec. (45)
36) 3 sc, dec. (36)
37) 2 sc, dec. (27)
38) 1 sc, dec. (18)
39) dec. (9)
Fasten off and sew in end.

LEGS & BODY
First you crochet leg 1 and fasten off. Then you are going to make leg 2, but you DO
NOT fasten off the leg this time. Now you are going to crochet the legs together and
continue on the body. Stuff the legs and body as you go. They should be firmly stuffed.
Leg 1 (with the unicoloured sock):
Start with your green cotton yarn and hook 2,5 mm.
1) 6 sc in MR (6)
2) inc. (12)
3) 1 sc, inc. (18)
4) 5 sc, inc. (21)
5-9) (5 rounds) 1 sc in each st. (21)
Now you are crocheting the heel of the foot. It is in itself a little crocheted square, that you are crocheting back and forth on the work you have already done. Here after you continue working around in spiral.
10) 4 sc, ch 1 and turn, 4 sc, ch 1 and turn, 4 sc, ch 1 and turn, 4 sc, ch 1 and turn, 4 sc, continue along the side of your square with 2 sc, 17 sc (23)
11) 2 sc along the side of your square, 23 sc (25)
12) 1 sc, dec., 2 sc, dec., 1 sc, dec., 3 sc, dec., 3 sc, dec., 3 sc, dec. (19)
13) 11 sc , dec., 6 sc (18)
14-45) (32 rounds) 1 sc in each st (18)
Change color to white on your next round. Work in the back loop only.
46) 1 sc in each blo (18)
47-49) (3 rounds) 1 sc in each st (18)
Change color to light blue on your next round.
50) 1 sc in each st (18)
Fasten off and sew in end.

Leg 2 (with the striped sock), DO NOT fasten off at the end:
Start with your dark yellow cotton yarn and hook 2,5 mm.
1) 6 sc in MR (6)
2) inc. (12)
3) 1 sc, inc. (18)
Change color to light yellow.
4) 5 sc, inc. (21)
5) 1 sc in each st (21)
Change color to dark yellow.
6-9) (4 rounds) 1 sc in each st (21)
Change color to light yellow.
10) 4 sc, ch 1 and turn, 4 sc, ch 1 and turn, 4 sc, ch 1 and turn, 4 sc, ch 1 and turn, 4 sc, continue along the side of your square with 2 sc, 17 sc (23)
11) 2 sc along the side of your square, 23 sc (25)
Change color to dark yellow.
12) 1 sc, dec., 2 sc, dec., 1 sc, dec., 3 sc, dec., 3 sc, dec., 3 sc, dec. (19)
13) 11 sc , dec., 6 sc (18)
14) 1 sc in each st (18)
Change color to light yellow.
15-16) (2 rounds) 1 sc in each st (18)
Change color to dark yellow.
17-19) (3 rounds) 1 sc in each st (18)
Change color to light yellow.
20-21) (2 rounds) 1 sc in each st (18)
Change color to dark yellow.
22-24) (3 rounds) 1 sc in each st (18)
Change color to light yellow.
25-26) (2 rounds) 1 sc in each st (18)
Change color to dark yellow.
27-29) (3 rounds) 1 f sc in each st (18)
Change color to white in the back loops only.
30) 1 sc in each blo (18)
31-49) (19 rounds) 1 sc in each st (18)
Change color to light blue.
50) 1 sc in each st (18)
Do NOT fasten off, continue on with the body.
NOTE:
Leg 1: make an edging on the sock with your green yarn by making a round of sc in the flo on round 46 (18)
Leg 2: make an edging on the sock with your dark yellow yarn by making a round of sc in the flo on round 30 (18)

Body:
51) Do 13 sc on leg 2 (this will make the toes point inwards. Depending on your yarn and your tension you might need to alter this number of sc, the point is that you join the legs together in that stitch that make the toes point at each other. You might need a few more or a few less stitches, to get the same result.), ch 3, continue with
18 sc around leg 1, do 3 sc along one side of the chain, do 5 sc on leg 2 (42)
52) 11 sc, inc., 3 sc on the other side of the chain, inc., 26 sc (44)
53) 10 sc, inc. (48)
54-60) (7 rounds) 1 sc in each st (48)
61) 7 sc, dec., (14 sc, dec.) x 2, 7 sc (45)
62-65) (4 rounds) 1 sc in each st (45)
66) 13 sc, dec. (42)
67-69) (3 rounds) 1 sc in each st (42)
70) 6 sc, dec., (12 sc, dec.) x 2, 6 sc (39)
71-72) (2 rounds) 1 sc in each st (39)
73) 11 sc, dec. (36)
Change color to light yellow on the next round in the back loop only.
74) 1 sc in each blo (36)
75) 5 sc, dec., (10 sc, dec.) x 2, 5 sc (33)
76-84) (9 rounds) sc in each st (33)
Change your color to white and work the next round in the back loop only.
85) 9 sc in blo, dec. in blo (30)
86) 1 sc in each st. (30)
Fasten off and leave tail for sewing.

Collar:
Use your light yellow yarn and hook 2,5
Place your hook from down below and up on round 85 and do 1 sc in each flo, join with a slip stitch in your first st. Fasten off and sew in end.

Dress:
Use your light blue yarn and hook 2,5 mm. You are starting your round in the front loop of round 74 of the body.
Round 1) Work from upwards and down trough the loops of round 74. Make a standing sc in the flo on the backside of the body, do 1 sc in each flo (36)
Continue working in spiral.
2) 11 sc, inc. (39)
3-4) 1 sc in each st (39)
5) 6 sc, inc, (12 sc, inc.) x 2, 6 sc (42)
6-8) (3 rounds) 1 sc in each st (42)
9) 13 sc, inc. (45)
10-13) (4 rounds) 1 sc in each st (45)
14) 7 sc, inc, (14 sc, inc.) x 2, 7 sc (48)
15-21) (7 rounds) 1 sc in each st (48)
22) 15 sc , inc (51)
23-28) (6 rounds) 1 sc in each st (51)
Fasten off and sew in ends.

Flap of the dress:
This is crocheted in rows. Use your light blue yarn and hook 2,5 mm.
Ch 12, start in 2. ch from your hook.
1 r: 1 sc in each st, ch 1 turn (11)
2 r: 1 sc in each st, ch 1 turn (11)
3 r: 1 sc in each st, ch 1 turn (11)
4 r: 1 1 sc in each st, ch 1 turn (11)
5 r: skip 1 st, 1 sc in each st, ch 1 turn (10)
6 r: skip 1 st, 1 sc in each st, ch 1 turn (9)
Do an edge of sc around the flap, except on the side that
you are going to sew onto the dress.
Fasten off and leave tail for sewing.
Dress patches:
These are crocheted in rows. Use your purple for the big one and your pink for the
small one. Use hook 2,5 mm.
Big:
Ch 5, start in the 2. ch from your hook.
1 r: 1 sc in each st, ch 1 turn (4)
2 r: 1 sc in each st, ch 1 turn (4)
3 r: 1 sc in each st, ch 1 turn (4)
4 r: 1 sc in each st, ch 1 turn (4)
Fasten off and sew in ends.
Small:
Ch 4, start in the 2. ch from your hook.
1 r: 1 sc in each st, ch 1 turn (3)
2 r: 1 sc in each st, ch 1 turn (3)
3 r: 1 sc in each st, ch 1 turn (3)
Fasten off and sew in ends.

ARMS
Start with your beige cotton yarn and hook 2,5 mm. Do not stuff the arms. Make 2.
1) 6 sc in MR (6)
2) inc. (12)
3) 2 sc, inc. (16)
4-9) (6 rounds) 1 sc in each st. (16)
10) dec., 12 sc, dec. (14)
11-34) (23 rounds) 1 sc in each st (14)
Change your color to light yellow.
35) 1 sc in each st (14)
36) 1 sc in each blo (14)
37-41) (5 rounds) 1 sc in each st (14)
Fold the arms flat at the top (remember DO NOT stuff them) close it of with a row of sc. Fasten off and leave end for sewing.
Sleeve edging:
Use your light yellow yarn and hook 2,5.
Make a row of sc in the flo on round 36 of each arm. Join with a slip stitch and sew in ends.

ASSEMBLING
1) Sew the body and head together.
2) Sew on arms right below the collar of the shirt.
3) Embroider eyebrows over each eye with black
yarn and freckles under each eye with brown yarn.
4) Mounting the hair. This proces takes a little
time. If you are too impatient, you can use a
thicker yarn.
Do the hair by pulling a piece of mohair tread
trough the scalp (approx 30 cm of tread).

– Pull a loop trough the scalp stitches (do not pull
it all the way trough).
– Take the ends of the yarn and pull them trough
the loop and pull it tight. Do this until you have
the amount of hair that you want.
– Section the hair into braids and bangs and trim
the hair as you would like it on her.

5) Sew on the dress flap. Make two suspenders by
doing two chains long enough to go from the top
of the flap, over the shoulders, crossing on the
back and ending on the back of the skirt.
6) Sew on the patches with stitches of your yellow
yarn.
7) Give her red cheeks by putting a little blush on
her.

We finished our pattern. You can send the finished pattern to me on facebook, instagram and pinterest.

https://www.facebook.com/amigurumi.sdk.today/
https://www.instagram.com/amigurumifreepatternss/
https://www.pinterest.com/crochetblogkb/

More Amigurumi Doll İdeas

Materials
size 5 or F crochet hook
scissors
needle for weaving in ends
stitch markers
light grey yarn for the body (I used Big Twist in Soft Grey)
grey yarn for the limbs (I used Big Twist in Medium Gray)
pink yarn for the hands and feet (I used Big Twist in Medium Rose)
purple yarn for the joints (I used Big Twist in Lilac)
a little bit of black yarn for the antennas (I used Big Twist in Black)
red, green, yellow, and blue yarn for embellishments (I used Big Twist in Varsity Red, Varsity Green, Varsity Yellow, and Varsity Blue)
fiberfill for stuffing
safety eyes
pipe cleaner
optional hot glue gun

Abbreviations
Here are the crochet stitches and abbreviations I use.
chain – ch
magic ring – mr
slip stitch – slst
single crochet – sc
half double crochet – hdc
increase – inc
decrease – dec
back loops only – BLO

Amigurumi robot girl free pattern

Head
Begin by making six panels in Soft Grey. You will attach them all together to create a block.
Panels – make 6
Ch 16
Row 1: in the 2nd ch from the hook, sc in each remaining stitch across (15)
Rows 2-15: ch, turn, and sc across (15)

Do not fasten off. Now you are going to crochet down one side, across the bottom, and up the other side. Turn your work to the right to begin single crocheting down the first side.

Place 15 single crochets evenly down the length of the panel. I placed matching colored stitch markers on the first and last stitch to make it easier to differentiate when attaching the panels to each other.

Turn the panel to the right and sc 15 across the bottom into the loops of the starting ch.

Turn the panel to the right and sc 15 evenly across the third side of the panel. Once again, I placed matching stitch markers in the first and last stitches.

Finally, slst to the first sc of row 15. Fasten off and weave in the end. That completes one panel. Make five more till you have a total of six.

Putting it together
Now you are going to begin attaching them to create a block. I use single crochet to attach them together. If you are as OCD as I am, you’ll want to make sure that all your rows are going the same way (like have all the rows going horizontal or vertical).

Begin by placing two of the panels together. You will join them by single crocheting into the tops of both panels. Using the Soft Grey yarn, attach to one side of the two panels.

Single crochet into all 15 stitches across the two panels. Make sure that you are working into the stitches on both panels. Once you’ve worked single crochets across the entire side, fasten off and weave in end.

Attach two more panels to these first ones in the same manner till you have a row of four panels.

Now, fold this row of four panels in half and attach the first panel to the last panel in the same manner.

This creates the outline of your block. Take one of the two remaining panels and place it on one side of the outline of the block.

Attach the Soft Grey yarn to your work and join this panel to the others by single crocheting around all four sides making sure to work your stitches into both the panel and the block outline. You may find that you need to add extra stitches in the corner to make sure you don’t have any large gaps. Fasten off and hide the end.

Now would be a good time to add the safety eyes. It doesn’t matter too much which side you put them on, so choose whichever side you’d like. Put the safety eyes between rows 13 and 14 and about 13 stitches apart.

Now you will add the final panel on the other side. Before you have completely attached the last panel, however, stuff firmly.

Finish attaching the final panel, fasten off, and hide the end. Whew! Your head is finished! I know that was probably a little confusing, so feel free to comment or email me if you have any questions!

Body
Just like the head, the body is made with the Soft Grey yarn and uses six panels that you crochet together to form a block.
Panels – make 6
Ch 11
Row 1: in the 2nd ch from the hook, sc in each remaining stitch across (10)
Rows 2-10: ch, turn, and sc across (10)

Without fastening off, you will crochet down one side, across the bottom, and up the other side just as you did with each panel for the head. Crochet 10 sc evenly across the first side, 10 sc into the other loops from the beginning ch along the bottom, and 10 sc evenly across the other side.

I placed stitch markers on the first and last stitches of the two sides, just as I did when making the head panels to make it easier to differentiate where the sides begin and end when attaching them together.

Slst to the the first sc of row 10. Fasten off and hide end. That completes one panel. Make five more till you have a total of six.

Putting it together
Just like with the head, you will attach the pieces by crocheting four together to form the outline of the block and then sew the end pieces around the outline to close it off.
Create the outline by crocheting together four of the panels. Then fold it in half and crochet the first and last panels together.
Attach the one of the remaining panel to the block outline by single crocheting all the way around both the panel and the outline. You may need to add extra sc in the corners to avoid big gaps.
Attach the last panel in like manner. Before you have finished completely attaching, however, stuff the body firmly. Finish attaching the side panel. Fasten off and hide end. That completes the body!
Now you need to attach the head to the body. Attach a piece of yarn to the body and sew it to the bottom of the head.

Skirt
Now, you are going to crochet a skirt to the bottom of the robot. Flip the head and body upside down and attach the Medium Grey yarn to the single crochets along the bottom of the body.
Round 1: 48 sc evenly into the crochets along the bottom of the body. Depending on whether or not you have placed extra stitches in the corners when attaching the panels, you may have more or less stitch than 48. So plan ahead to get all 48 stitches evenly around (48)
Round 2: [inc, 7 sc] x 6 (54)
Round 3: [4 sc, inc, 4 sc] x 6 (60)
Round 4: [9 sc, inc] x 6 (66)
Round 5: [5 sc, inc, 5 sc] x 6 (72)
Rounds 6-20: sc around (72)
Round 21: in BLO [5 sc, dec, 5 sc] x 6 (66)
Round 22: [9 sc, dec] x 6 (60)
Round 23: [4 sc, dec, 4 sc] x 6 (54)
Round 24: [dec, 7 sc] x 6 (48)
Begin stuffing and continue stuffing as you go along. Try not to over stuff the skirt as you want the bottom to be flat and not curved.
Round 25: [3 sc, dec, 3 sc] x 6 (42)
Round 26: [5 sc, dec] x 6 (36)
Round 27: [2 sc, dec, 2 sc] x 6 (30)
Round 28: [dec, 3 sc] x 6 (24)
Round 29: [sc, dec, sc] x 6 (18)
Round 30: [sc, dec] x 6 (12)
Round 31: dec x 6 (6)
Fasten off. Use the tail to weave through the last 6 stitches, then pull to cinch the hole closed. Hide end.

Buttons – make 4
I made four buttons each in a different color: Varsity Red, Varsity Green, Varsity Yellow, and Varsity Blue.
You can attach them to the body by sewing them on, but I used a hot glue gun. It was much easier and gave the edges of the buttons more distinction.
To make a button: 6 sc in mr, slst to the first sc, and fasten off. If you are going to sew the buttons on, leave a tail. If you are hot gluing the buttons on, weave in the end.
Glue or sew the buttons in the upper left corner of the robot’s body.

Shoulder Joints – make 2
With Lilac, create a magic ring.
Round 1: 6 sc in mr (6)
Round 2: inc x 6 (12)
Round 3: [inc, sc] x 6 (18)
Rounds 4-5: sc around (18)
Fasten off and leave a long tail for sewing.
Stuff and attach to the top of each side of the robot.

Arms – make 2
Start with Medium Rose. Stuff as you go along.
Create magic ring.
Round 1: 6 sc in mr (6)
Round 2: inc x 6 (12)
Round 3: [inc, sc] x 6 (18)
Round 4: [sc, inc, sc] x 6 (24)
Round 5: in BLO, sc around (24)
Round 6: [sc, dec, sc] x 6 (18)
Round 7: sc around (18)
Round 8: [dec, sc] x 6 (12)
Round 9: sc around (12)
Round 10: [sc, dec] x 4 (8)
Switch to Medium Gray.
Rounds 11-20: sc around (8)
Fasten off, leaving a long tail for attaching.
Sew each arm to the shoulder joints.

Head Antennas – make 2
Now we are going to make the antennas that go on either side of the head. For this, I use pink, black, and purple yarn. I also use a pipe cleaner to help the antennas stand up.
Using Medium Rose, create magic ring.
Round 1: 6 sc in mr (6)
Round 2: inc x 6 (12)
Rounds 3-4: sc around (12)
Round 5: dec x 6 (6)
Stuff and switch to black yarn.
Round 6: dec x 3 (3)
Rounds 7-12: sc around (3)
Switch to Lilac.
Round 13: inc x 3 (6)
Round 14: inc x 6 (12)
Round 15: [inc, sc] x 6 (18)
Round 16: [inc, 2 sc ] x 6 (24)
Rounds 17-18: sc around (24)

Fasten off and leave a long tail for attaching to the head.

Now we are going to insert the pipe cleaner using a tapestry needle.
Thread the pipe cleaner through the needle. I pulled the needle through to the middle of the pipe cleaner and folded it in half. This way the pipe cleaner was double thick and added extra support to the antenna.
Insert the needle into the opening in the purple part of the antenna.
Push it all the way through the black part of the antenna and out the pink part.
Cut the pipe cleaner to free the needle on one side and hide the ends on the other.
Stuff the purple portion of the antenna and sew it to the side of the head.

Bow
Finally, to make this gal a little cuter, add a bow! I made mine using red.
With Varsity Red, ch 30 and slst to the first ch to form a circle.
Round 1: ch 1, hdc in the same ch as the slst and all the way around, slst to first hdc (30)
Rounds 2-4: ch1, hdc around, slst to first hdc of round (30)

Fasten off and leave a long tail for wrapping and attaching.

Fold the bow in half with the tail in the middle. Using the tail, wrap it tightly around the middle of the bow several times to cinch it.
Attach the bow to the robot’s head anywhere you’d like. I put mine in the upper left-hand corner.
And there you have it! Your robot is done! I have loved watching my girls run around flinging this robot all around.

We finished our pattern. You can send the finished pattern to me on facebook, instagram and pinterest.

https://www.facebook.com/amigurumi.sdk.today/
https://www.instagram.com/amigurumifreepatternss/
https://www.pinterest.com/crochetblogkb/

More Amigurumi Robot İdeas

Materials:
Cotton thread used double (color peach, gray, beige, light brown, dark brown and
black)
Crochet hook (2,5 mm, 3 mm and 1,75 mm)
Fiberfill for stuff
Safety eyes
Tapestry needle, stitch marker

Abbreviations:
mr – magic ring
sc – single crochet
inc – increase
dec – decrease
ch – chain
dc: double crochet
FLO – front loop only
BLO – back loop only
Sl st – slip stitch
[ ] repeat work
hdc – half double crochet
( ) number of stitches of the round
dec3 – decrease 3 stitches together
inc3 – increase 3 stitches in the same place
All the pieces are worked in a spiral, otherwise is indicated

Amigurumi doll free crochet pattern

Arms (make 2)
Start with peach color, hook 2,5 mm.
1) 6 sc in a MR (6)
2) inc x 6 (12)
3) to 5) 12 sc (12)
6) dec x 6 ( 6)
7) dec x 3 (3).
Change to beige yarn and make Ch 11. Cut.
-Sew them to the body, close to the neck.

Legs (make 2)
Start with black color and hook 2,5 mm.
1) 6 sc in a MR (6)
2) inc x 6 (12)
3) 1 sc, 1 inc (18)
4) to 5) 18 sc (18)
6) 1 sc, 1 dec (12)
7) dec x 6 ( 6)
8) dec x 3 (3).
Change to peach yarn and Ch 25. Cut.
-ATTENTION: For inside the shirt, put both
thread into of a tapestry needle and go
through the head to the top part, make a knot.
You should do this before start to crochet the
trousers.

Head
With peach color, hook 2,5 mm
1) 6 sc in a MR (6)
2) inc x 6 (12)
3) 1 sc, 1 inc (18)
4) 2 sc, 1 inc (24)
5) 3 sc, 1 inc (30)
6) 4 sc, 1 inc (36)
7) to 12) 36 sc (36). Put the eyes between
rounds 9 and 10, separated by 6 stitches.
13) 4 sc, 1 dec (30)
14) 3 sc, 1 dec (24)
15) 2 sc, 1 dec (18)
16) 1 sc, 1 dec (12)
17) 6 dec (6).
18) 6 sc (6) Continue with the shirt.
-Embroider the nose and eyebrows.

Shirt
Change to beige color. Working in rows, join
with slst, and start with ch 1 every row.
1) inc x 6 (12)
2) 1 sc, 1 inc (18)
3) 2 sc, 1 inc (24)
4) (11 sc, 1 inc3) x 2 (28)
5) (6 sc, 1 inc) x 4 (32)
6) to 10) 32 sc (32). Change to dark brown.
This is a good moment to put the feet
inside.

Trousers
With dark brown color, working the same
way as the shirt.
1) BLO (6 sc, 1 dec) x 4 (28)
2) to 4) 28 sc (28). Cut.
-Join the thread in the central back. Work
the legs joining with a slst and starting
with ch 1.

***First leg:
1) 14 sc, join in the first st. (put one leg
inside) (14)
2) 12 sc, 1 dec (the decrease goes between
the legs) (13)
3) to 8) 13 sc (13). Cut.
***Second leg: join the thread in the round
4, when we started to crochet the first leg.,
in the center.
1) 14 sc, join in the first st (put the other
leg inside) (14)
2) 1 dec, 12 sc (this decrease goes between
the legs) (13)
3) to 8) 13 sc (13). Cut.
**Embroider the pockets with light brown
color. Also, embroider the waist.
***Suspenders: only 1 thread (not double),
hook 1,75 mm: on the front part, right leg,
join the thread on the first dark brown row,
in the center. Ch 26, cross to the back part,
to the opposite side, join with a slst. Ch 1,
and go back with 26 sc to the beggining.
Join with a slst. Cut and hide the threads.
Repeat for the other suspender.

Backpack
With dark brown, hook 2,5 mm:
1) Ch 8, from the second ch: 6 sc, inc3. On
the other side: 5 sc, 1 inc (16)
2) inc, 5 sc, inc x 3, 5 sc, inc x 2 (22)
3) to 8) 22 sc (22)
**Continue with the cover:
1) BLO 11 sc, turn, ch 1
2) to 5) 11 sc, turn, ch 1. Cut the thread.
**Join the thread on the side. Ch 32, join with
sl st to the other side (you made the belt. Ch 1,
make 32 sl st. Cut and hide the threads.
**With dark brown embroider a detail in the
cover as the picture shows. You can sew both
parts to get a closed backpack or you can sew
a button instead.

Hair
I worked it directly on the head. But if you
want it, you can make first a wig cap (like I did
in my other projects) with black yarn and then
start to crochet the curlers over it. You don’t
need to cut the thread after each row, you can
continue working with the same yarn.
***Only with 1 black thread, hook 2,5 mm, I
will work over the rows of the head, in this
way: (join the thread in the first row):
1) (Ch 6: from the second ch, inc x 5) x 6
2) (Ch 6: from the second ch, inc x 5) x 12
3) Do not work on row 3.
4) (Ch 6: from the second ch, inc x 5) x 24
5) Do not work on row 5.
6) Make curlers every other stitch, only side
to side (up close to the eyes): (Ch 6: from the
second ch, inc x 5).Here you can decide how
many curlers you want.
7) Do not work on row 7.
8) Repeat row 6.

Beret with visor
With gray color, worked double, hook 3 mm:
1) 6 sc in a MR (6)
2) inc x 6 (12)
3) 1 sc, 1 inc (18)
4) 2 sc, 1 inc (24)
5) 3 sc, 1 inc (30)
6) 4 sc, 1 inc (36)
7) 5 sc, 1 inc (42)
8) 5 sc, 1 inc (49)
9) to 10) 49 sc (49)
11) 5 sc, 1 dec (42)
12) 42 sc (42)
13) 5 sc, 1 dec (36)
14) 36 sc (36). Do not cut the thread.
VISOR: both skipped stitch and slst do not
count as a stitch of the row. Turn at the end
of each row.
1) Make 16 sc
2) Skip 1 st, 14 sc, 1 slst (14)
3) Skip 1 st, 12 sc, 1 slst (12)
4) Skip 1 st, 10 sc, 1 slst (10)
5) Skip 1 st, 8 sc, 1 slst (8). Cut the thread.
Join the thread at the back part, make and
edge of sc.

We finished our pattern. You can send the finished pattern to me on facebook, instagram and pinterest.

https://www.facebook.com/amigurumi.sdk.today/
https://www.instagram.com/amigurumifreepatternss/
https://www.pinterest.com/crochetblogkb/

More Amigurumi Baby Ideas

Materials:
Cotton thread fingering (colour peach, red, orange, dark Brown, light pink, pink)
Acrylic (dark Brown for the teddy bear)
Crochet hook (1,10 mm)
Fiberfill for stuff
Safety eyes
Tapestry needle.

Abbreviations:
mr – magic ring
inc – increase
dec – decrease
ch – chain
FLO – front loop only
Sl st – slip stitch
BLO – back loop only
sc – single crochet
[ ] repeat work
hdc – half double crochet
( ) number of stitches at the end of the round

Amigurumi doll free pattern

Arms (make 2)
Starting with peach colour yarn, working on
spiral
1) 4 sc in a MR (4)
2) [1 sc, 1 inc] x 2 (6)
3) 6 sc (6)
4) [1 sc, 1 dec] x 2 (4)
5) to 10) Change to colour pink, 4 sc (4)
— It’s not neccesary stuff them.

Legs (make 2)
With dark brown colour yarn, working on
spiral
1) 3 sc in a MR (3)
2) 3 sc (3)
3) 1 inc, 1 sc, 1 inc (5)
4) to 6) 5 sc (5)
7) Change to orange, 5 sc (5)
8) Change to red, 5 sc (5)
9) to 20) Repeat row 8 and 9
— You’ll finish with red.
— It’s not neccesary stuff them.
— make 2. Do not cut the thread on the 2nd.

Body
Continue from the 2nd leg, make 2 extras
sc extras to stand on the inner side (if you
are already there, don’t do any extra
stitches).
1) Continuing with red colour yarn: ch 2, 5
sc (first leg), 2 sc over ch, 5 sc (second
leg) (14)
2) to 3) 14 sc (14)
4) Change to pink colour, 14 sc (14)
5) BLO: 14 sc (14)
6) [5 sc, 1 dec] x 2 (12)
7) [4 sc, 1 dec] x 2 (10)
8) to 10) 10 sc (10)
11) Attaching the arms: [1 sc (going through
2 stitches of the arm and 1 of the body)] x 2,
3 sc on body, [1 sc (going through 2 stitches
of the arm and 1 stitch of the body)] x 2, 3
sc (10)
12) Change to peach colour yarn, BLO 5 dec
(5)
13) 5 sc (5)

Head
Continue with the head:
14) 5 inc (10)
15) 10 inc (20)
16) [1 sc, 1 inc] x 10 (30)
17) to 23) 30 sc (30)
24) [3 sc, 1 dec] x 6 (24). Stuff
25) 1 sc, 1 dec, [2 sc, 1 dec] x 5, 1 sc (18)
26) [1 sc, 1 dec] x 6 (12)
27) 6 dec (6)
— Finish to stuff and close.
— Safety eyes: between round 20 and 21,
separated by 5 holes.

Dress
Turn your doll upside down, and hook the
pink colour yarn on FLO of round 4 of the
body. Each row starts with ch 1 and finish
with a sl st on the first stitch.
1) 14 sc (14)
2) [1 sc, 1 inc] x 7 (21)
3) to 5) 21 sc (21)
6) [2 sc, 1 inc] x 7 (28)
7) and 8) 28 sc (28)
9) Change to light pink, 28 sc (28). Cut the
thread and hide.
—NECK: turn your doll upsode down and
find the middle of the chest. Hook the light
pink colour yarn on the left stitch (from the
middle), on FLO of round 11 of the body.
1) 9 inc (18). Turn.
2) ch 1, [1 sc, 1 inc] x 9 (27). Turn.
3) ch1, 5 sc, 17 hdc, 5 sc (27). Cut the thread
and hide.
— Pompon for the neck: make 2.
1) With light pink, 4 sc in a MR (4). Close and
sew to the neck of the dress.

Hat
Start with pink colour yarn, working on
spiral:
1) 6 sc in a MR (6)
2) 6 inc (12)
3) [1 sc, 1 inc] x 6 (18)
4) [2 sc, 1 inc] x 6 (24)
5) [3 sc, 1 inc] x 6 (30)
6) [9 sc, 1 inc] x 3 (33)
7) to 11) 33 sc (33)
12) Change to light pink colour: [9 sc, 1 dec] x
3 (30)
–Make a regular pompón and sew it to the
hat
–FLOWER: 1) Light pink: 4 sc in a MR (4)
2) Red: [ch 3 and sl st in the same
stitch, 1 sl st on the next stitch] x 5 petals
(the last petal goes into the first stitch
where you did the first petal)

Hair
Put the hair between rounds 1 to 4 from the
top of the head. Cut threads of 28 cm
aproximately, folded in half. With a crochet
hook, take a stitch of the head, pull the
thread for it, then pass the other extreme of
the thread under the loop; you did a knot.
When you finish, trim the hair at the
shoulders.

Amigurumi bear free pattern

Body and head
With dark brown color yarn:
1) 3 sc in a MR (3)
2) 3 inc (6)
3) [1 sc, 1 inc] x 3 (9)
4) [2 sc, 1 inc] x 3 (12)
5) [3 sc, 1 inc] x 3 (15)
6) to 9) 15 sc (15)
10) [3 sc, 1 dec] x 3 (12)
11) [2 sc, 1 dec] x 3 (9)
12) [1 sc, 1 dec] x 3 (6)
13) [1 sc, 1 inc] x 3 (9)
14) [2 sc, 1 inc] x 3 (12)
15) [1 sc, 1 inc] x 6 (18)
16) [2 sc, 1 dec] x 6 (24)
17) to 19) 24 sc (24)
20) [2 sc, 1 dec] x 6 (18)
21) [1 sc, 1 dec] x 6 (12)
22) 6 dec (6). Cut the thread and close.
— Safety eyes, between rounds 6 and 7 from
the center of the head.

Assembly:
Once you finish the doll, embroider her
white eyes around safety eyes.
Embroider her eyelashes and mouth.
Make a bow on her shoes.

Arms and legs (make 4)
With dark brown colour yarn:
1) 3 sc in a MR (3)
2) 3 inc (6)
3) and 4) 6 sc (6)
5) [1 sc, 1 dec] x 3 (4)
6) and 7) 4 sc (4). Cut the thread and sew
them to the body.

Muzzle
With beige colour yarn:
1) 3 sc in a MR (3)
2) 3 inc (6). Sew it to the head.

Ears (x2)
With dark brown colour yarn:
1) 3 sc in a MR (3). Cut and sew them to the
head.
— Embroider the nose with beige or black
colour.

Your baby is done! I hope you enjoyed doing this!
I would love to see your finished baby!

We finished our pattern. You can send the finished pattern to me on facebook, instagram and pinterest.

https://www.facebook.com/amigurumi.sdk.today/
https://www.instagram.com/amigurumifreepatternss/
https://www.pinterest.com/crochetblogkb/

More Amigurumi Doll Ideas

YARN USED
Yarn size 3.00mm (Fingering) in the following colors:
Light peach
Yellow
Yarn size 4.00mm (DK) in the following colors:
Dark Purple

OTHER MATERIAL
2.00mm hook
3.00mm hook
Tapestry needle
Black safety eyes (I used 9mm safety eyes)
Stuffing
Scissors

STITCHES
Ch: chain
Slst: slip stitch
Sc: single crochet
Hdc: half double crochet
Dc: double crochet
Inc: increase
Dec: decrease
Incdc: increase with double crochet
FLO: work in front loop only
BLO: work in back loop only

TIPS
Use a stich marker and count your stitches
Remember to use the same yarn size for the body and the dress
Each round is worked in a continuous spiral. Do not join rounds with slip stitch or turn
unless stated otherwise.
Work through the entire stitch unless stated otherwise
Read through the pattern completely before beginning to crochet.

ARMS, LEGS AND BODY
Work in a continuous spiral. Make all these part
with light peach yarn 3.00mm and 2.00mm
hook

ARMS
Make two.
Rnd1: 6sc in magic ring (6)
Rnd2-Rnd12: 6sc (6) 11 rounds
Fasten off leaving a short tail.

LEGS
Make two.
Rnd1: 7sc in magic ring (7)
Rnd2-Rnd18: 7sc (7) 17 rounds
First leg: Fasten off leaving a short tail.
Second leg: don’t cut the yarn, keep on working
to join the legs.
I worked legs very tight and I didn’t stuff them. If
you need stuffing, do it now!

BODY
Rnd19: 4sc in the leg you are working
(the second made), chain 2, 7sc in the
other leg (the first made), 2sc in back
side of the chain, 3sc in the leg (the
second made) (18)
See purple yarn to know how to join the leg
Do not change color (it is only to make it clearer)
Rnd20: 18sc (18)
Rnd21: (2sc, 1inc) x3 (this will be her
bottom), 9sc (21)
Rnd22-Rnd24: 21sc (21) 3 rounds
Rnd25: (2sc, 1dec) x3, 9sc (18)
Rnd26: 18 sc (18)
Rnd27: (7sc, 1dec) x2 (16)
Rnd28: (6sc, 1dec) x2 (14)
Now join the arms:
Rnd29: 2sc, 6sc in the first arm, 8sc in
the body, 6sc in the second arm, 4sc in
the body (26)
Rnd30: (11sc, 1dec) x2 (24)
Rnd31: (2sc, 1dec) x6 (18)
Stuff the body. Keep stuffing as you close the
body
Rnd32: (1sc, 1dec) x6 (12)
Rnd33: 6dec (6)
Rnd34- Rnd35: 6sc (6)
Rnd36: 6inc (12)
Rnd37: 12inc (24)
Rnd38: (1sc, 1inc) x12 (36)
Rnd39: (5sc, 1inc) x12 (42)
Rnd40- Rnd49: 42sc (42) 10 rounds
Stop and place the safety eyes between round
42 and round 43 8 stitches apart. You can
embroider the eyes if you wish. Pay attention to
put them in the front part.
TIPS: I used half of a toothpick to make the
neck stronger
Rnd50: (5sc, 1dec) x6 (36)
Rnd51: (4sc, 1dec) x6 (30)
Rnd52: (3sc, 1dec) x6 (24)
Rnd53: (2sc, 1dec) x6 (18)
Stuff the head. Keep stuffing as you close the
head
Rnd54: (1sc, 1dec) x6 (12)
Rnd55: 6dec (6)
Cut the yarn leaving a long tail to close your
work. Make a knot and hide the yarn inside the
doll’s body.

EARS
Make 2
Chain 2, 4sc in the second loop from
hook
Fasten off leaving a long tail for sewing.
Sew the ears 5 stitches from the eyes, between
round 42 and 44.

DRESS
Work with yellow yarn size 3.00 and 2.00mm
hook. Start working in rows, we will join the
round later. At the end of each row, chain 1,
turn your work and start from second loop from
hook
Rw1: chain 29
Now we will create two holes for the sleeves
Rw2: 1inc, 2sc, 1inchdc, skip 7 stitches,
1inchdc, 4sc, 1inchdc, skip 7 stitches,
1inchdc, 2sc, 1inc (20)
Rw3-Rw6: 20sc (20) 4 rows
Now we will crochet the skirt: join the round with
a slip stitch, continue working in continuous
spiral.
Rnd1: FLO 20incdc (40)
Rnd2: 40dc (40)
Rnd3: 10incdc, 20inc, 10incdc (80)
Rnd4: 20incdc, 40inc, 20incdc (160)
Slst and fasten off. Hide the yarn in the work.

PETTICOAT
Work with dark purple yarn size 4.00mm and
2.00mm hook. Start working in rounds in back
loops of skirt’s rnd1. Start in back side of the
dress!
Rnd1: BLO 20dc (20)
Rnd2: (1dc, 1incdc) x10 (30)
Rnd3: 8dc, 15sc, 7dc (30)
Rnd4: 8incdc, 15inc, 7incdc (60)
Rnd5: 18incdc, 30inc, 14incdc (120)
SlSt and fasten off. Hide the yarn in the work.

FLOWERS
Make 2
Work with dark purple yarn size 4.00mm and
2.00mm hook. dress
Rnd1: 3sc in a magic ring
Rnd2: (chain2, 1slst in the next stitch) x3
Fasten off. Leave a long tail for sewing
Dress the doll and sew the back closure
together
Sew the two flowers at the base of the dress
straps.

HAIR
Work with dark purple yarn size 4.00mm and
3.00mm hook.
Start working in a continuous spiral, then we will
work every strand of hair in rows.
Rnd1: 6sc in magic ring (6)
Rnd2: 6inc (12)
Rnd3: (1sc, 1inc) x6 (18)
Rnd4: (2sc, 1inc) x6 (24)
Now start working the strands:
St1-St2: chain 6, start from second loop
from hook, 5sc, slst in BLO of the next
stitch of round 4
St3-St4: chain 6, start from second loop
from hook, 5sc, slst in the next stitch of
round 4
St5: chain 21, start from second loop
from hook, 20sc, slst in round 4
St6-st14 (9 strands): chain 42, start
from third loop from hook, 40hdc, slst in
round 4 skipping one loop.
St15: chain 21, start from second loop
from hook, 20sc, slst in round 4
St16-St17: chain 6, start from second
loop from hook, 5sc, slst in FLO of the
next stitch of round 4
Fasten off
Sew the hair to the top of the head

ODANGO
Make 2. Work with dark purple yarn size
4.00mm and 3.00mm hook.
Work in a continuous spiral
Rnd1: 6sc in magic ring (6)
Rnd2: 6inc (12)
Rnd3: (1sc, 1inc) x6 (18)
Rnd4: (2sc, 1inc) x6 (24)
Fasten off. Leave a long tail for sewing
Sew them to the top of the head
Complete your doll with a yellow ribbon in her
neck and a ribbon in her right feet.

We finished our pattern. You can send the finished pattern to me on facebook, instagram and pinterest.

https://www.facebook.com/amigurumi.sdk.today/
https://www.instagram.com/amigurumifreepatternss/
https://www.pinterest.com/crochetblogkb/

More Amigurumi Doll İdeas

YARN USED
Light peach yarn size 3.00 mm (cotton fingering)
Yellw yarn size 3.00mm (cotton fingering)
Red yarn size 3.00mm (cotton fingering)
Blue pink yarn size 3.00mm (cotton fingering)
White yarn size 3.00mm (cotton fingering)
Black yarn size 4.00 (acrylic DK)
White and black yarn to embroider eyes

MATERIAL
2.00mm hook
3.00mm hook
Tapestry needle
Black safety eyes (I used 9mm safety eyes)
Stuffing
Scissor

STITCHES
Ch: chain
Slst: slip stitch
Sc: single crochet
Hdc: half double crochet
Dc: double crochet
Inc: increase
Dec: decrease
Inchdc: increase with half double crochet
FLO: work in front loop only
BLO: work in back loop only

TIPS
Use a stich marker
Pay attention to use the same yarn size for the body and the dresses.
Each round is worken in continuous spiral. Do not join rounds with slip stitch or turn
unless stated otherwise.
Work trought the entire stitch unless stated otherwise

ARMS, LEGS AND BODY
Work all these part with light peach yarn size
3.00mm and 2.00mm hook.
Work in continuous spiral.
ARMS
Make two.
Rnd1: 6sc in magic ring (6)
Rnd2-Rnd3: 6sc (6)
Rnd 4: 6sc (6)
Rnd5: (1sc, 1inc) x3 (9)
Rnd6-Rnd7: 9 sc (9)
Rnd 8: (1sc, 1dec) x3 (6)
Rnd9-Rnd12: 6sc (6)

LEGS
Make two.
Rnd1: 7sc in magic ring (7)
Rnd2-Rnd18: 7sc (7)
First leg: Fasten off and pull out the yarn
Second leg: don’t cut the yarn, keep on working
to join the legs

BODY
Rnd19: 4sc in the leg you are working
(the second made), 2ch, 7sc in the other
leg (the first made), 2sc in back side of the
chain, 3sc in the leg (the second made)
(18)
Rnd20: 18sc (18)
Rnd21: (2sc, 1inc) x3 (this will be the
bottom part), 9sc (21)
Rnd22-Rnd24: 21sc (21)
Rnd25: (2sc, 1dec) x3, 9sc (18)
Rnd26: 18 sc (18)
Rnd27: (7sc, 1dec) x2 (16)
Rnd28: (6sc, 1dec) x2 (14)
Now join the arms:
Rnd29: 2sc, 6sc in the first arm, 8sc in the
body, 6sc in the second arm, 4sc in the
body (26)
Rnd30: (11sc, 1dec) x2 (24)
Rnd31: (2sc, 1dec) x6 (18)
Stuff the body. Keep stuffing while you close the
body
Rnd32: (1sc, 1dec) x6 (12)
Rnd33: 6dec (6)
Rnd34: 6sc (6)
Rnd35: 6sc (6)
Rnd36: 6inc (12)
Rnd37: 12inc (24)
Rnd38: (1sc, 1inc) x12 (36)
Rnd39: (5sc, 1inc) x6 (42)
Rnd40-Rnd49: 42sc (42)
Stop and place the safety eyes between round
42 and round 43 8 stitches apart. You can
embroider the eyes if you want. Pay attention to
put them in the front part.
TIPS: I use an half toothpick to make the neck
stronger
Rnd50: (5sc, 1dec) x6 (36)
Rnd51: (4sc, 1dec) x6 (30)
Rnd52: (3sc, 1dec) x6 (24)
Rnd53: (2sc, 1dec) x6 (18)
Stuff the head. Keep stuffing while you close the
head
Rnd54: (1sc, 1dec) x6 (12)
Rnd55: 6dec (6)
Cut the yarn leaving a long tail for closing your
work. Make a knot and hide the yarn inside the
doll’s body.

EARS
Make 2
Chain 2, 4sc in the second loop from hook
Sew the ears 5 stitches from the eyes, between
round 42 and 44.

DRESS
T-SHIRT
Work with blue yarn size 3.00mm and 2.00mm
hook. Start working in rows. At the end of the
row, chain 1, turn your work and start from
second loop from hook
Rw1: chain 29
Rw2: 28sc (28)
Now we will create two holes for the sleeves
Rw3: 1inc, 2sc, 1inchdc, skip 7 stitches,
1inchdc, 4sc, 1inchdc, skip 7 stitches,
1inchdc, 2sc, 1inc (20)
Rw4-Rw6: 20sc (20)
Fasten off
Return in Row 1 and make 28 slst with white
yarn in the other side of the chain

SLEEVES
Work in round in the holes created in rw3
Rnd1-Rnd2: 8sc (8)
Rnd3: 8 slst with red yarn

OVERALLS
Work with yellow yarn size 3.00mm and 2.00mm
hook. We will start with trousers leg
Rnd1: chain 12, then join the round with
a slst
Rnd2-Rnd3: 12sc (12)
Fasten off
Then, make a second leg like the first but don’t
fastent off, keep on working the overalls to join
this two pieces
Rnd 4: 6sc in the leg you are working (the
second made), 2ch, 12sc in the other leg
(the first made), 2sc in back side of the
chain, 6sc in the leg (the second made)
(28)
Rnd5: 28sc (28)
Rnd6: (5sc, 1dec) x4 (24)
Rnd7: (4sc, 1dec) x4 (20)
Rnd8-Rnd10: 20sc (20)
Now we will work the high part in row (start every
row from second loop from hook):
Rw1: 10sc, ch1 and turn
Rw2: 8sc, ch1 and turn
Rw3: 1dec, 4sc, 1dec, ch1 and turn
Rw4-Rw5: 6sc, ch1 and turn
Rw6: 6sc
Fasten off. You can embroider with red yarn the
pants.

SUSPENDERS
Work in the back of overalls, skipping 3 stitches
from the part worked in row. Make one on the left
part and one on the right part.
Rw1: chain 20

BOOTS
Work with yellow yarn size 3.00mm and 2.00mm
hook.
Rnd1: chain 6, start from second loop
from hook, 5sc, 5sc in the other side of the
chain (10)
Rnd2: 10sc (10)
Rnd3: 1sc, 1inc, 7sc, 1inc
Rnd4: 12sc (12)
Rnd 5: 2dec, 8sc (10)
Rnd6: 10sc (10)
Slst and fasten off
Dress the doll: sew the T-shirt on the back, then
put on the overalls and sew suspenders in the
front part crossing them on the back

HAIR
Work all these part with black yarn size 4.00mm
and 3.00mm hook.
Start working in continuous spiral, then we will
work every strands of hair in row.
Rnd1: 6sc in magic ring (6)
Rnd2: 6inc (12)
Rnd3: (1sc, 1inc) x6 (18)
Rnd4: (2sc, 1inc) x6 (24)
Now start working the strands:
St1: chain 8, return with 7sc, slst in BLO
of the next stitch of round 4
St2: chain 10, return with 9sc, slst in BLO
of the next stitch of round 4
St3: chain 12, return with 11sc, slst in the
next stitch of round 4
St4: chain 21, (1sc, 1inc) x4, 12sc, slst in
the next stitch of round 4
St5- St13 (9 strands): chain 22, start
from third loop from hook, (1hdc, 1inchdc)
x4, 12sc, slst in round 4, skipping one
loop
St14: chain 21, (1sc, 1inc) x4, 12sc, slst
in the next stitch of round 4
St15: chain 10, return with 9sc
St16: work on front loop of st1: chain 8,
return with 7sc, slst in FLO of the next
stitch of round 4
St17: work on front loop of st2: chain 10,
return with 9sc, slst in FLO of the next
stitch of round 4
Fasten off
Sew round 1 of the hair on the top of doll’s head.
The middle of the face (where should be th nose)
is between st1 and st2. Part the hair between
st15 and st1, then sew the other strands. I sewed
strand 4 in front of the ear, and strand 14 behind,
for an asymmetrical look! Strands 16 and 17
make the bangs thicker.

RIBBON
Work with red yarn size 3.00mm and 2.00mm
hook.
Rw1: chain 17
Rw2: 2sc, 4dc, 4sc, 4dc, 2sc
Fasten off. Sew the ends together and knot
some yarn in the middle of this stripe to create
the ribbon. Sew it on the top of the hair.

We finished our pattern. You can send the finished pattern to me on facebook, instagram and pinterest.

https://www.facebook.com/amigurumi.sdk.today/
https://www.instagram.com/amigurumifreepatternss/
https://www.pinterest.com/crochetblogkb/

More Amigurumi Snow White İdeas