MATERIALS NEEDED:
Finish size from recommended materials 25 cm. YarnArt Jeans (160 m/50 gr):
– grey — No 49;
– red — No 90;
– green — No 82;
– white — No 62.
Sewing eyes plastic 5 mm- 2 pcs.
Crochet hook 1,75 mm.
Stuffing material.
Buttons 9 mm – 5 pcs.

Abbreviations:
sc : Single Crochet
inc : Increase
dec : Decrease
st: Stitch
hdc: Half Double Crochet
sl-st : Slip Stitch
ch : Chain
..in : make increase into same stitch as many as the number which is given in front of “inc” abbreviation (exp; 3inc, 4inc..).
FLO : Crochet into front loops only
BLO : Crochet into back loops only
OS : offset stitch

ARMS (MAKE 2):
Grey color.
1. 6 sc into MR
2. 6 inc (12)
3-5. (3 rnds). 12 sc
Change to white color.
6-21. (16 reds). 12 sc
Stuff only the lower part of the arm.
22. 6 dec
Close the hole.

TAIL:Grey color.
1. 6 sc into MR (6)
2. (sc, inc)x3 (9)
3-4. (2 rnds). 9 sc
Leave a long thread to sew on.

LEGS-BODY:
Grey color.
1. 6 sc into MR (6)
2. (sc, inc)x3 (9)
3. (2 sc, inc)x3 (12)
4. 12 sc
Change to red, leave the end of the red thread 50 cm outside.
5. 12 sc BLO
6-10 (5 rnds). 12 sc
Cut the thread on the first leg and fasten it.
On the second leg, do not cut the yarn, and crochet another 4 sc so that the colour change point is at the back.
Take the remaining red yarn out and tie it behind the FLO of row 5 by hooking from bottom to top — ch, sc into the same loop, 11 sc.
Fasten the thread and hide it.
Stuff the legs.

Continue crocheting the body. Chain 8.
Join the chain to the second leg so that
the colour change point is at the back.
11. 12 sc along the left leg, 8 sc along the chain, 12 sc along the pight leg, 4 sc along the chain — we have stopped in the middle of the backrest. Place a marker – this will be the start of the row.
12. (sc, inc)x2, 6 sc, inc, 5 sc, (inc, sc)x2, (sc, inc)x2, 5 sc, inc, 6 sc, (inc, sc)x2 (50)
13. (2 sc, inc)x2, 13 sc, (inc, 2 sc)x2, (2 sc, inc)x2, 13 sc, (inc, 2 sc)x2 (58) 14-21 (8 mds). 58 sc + OS
22. 46 sc, (dec, 2 sc)x3 (55)
23. (2 sc, dec)x3, 43 sc (52)
24. 52 sc
Change to white color.
25. 52 sc BLO
26. 52 sc + OS
Next, make sure that the beginning of the row is in the centre of the back. If necessary, crochet OS.
27. 4 sc, dec, 14 sc, dec, 8 sc, dec, 14 sc, dec, 4 sc (48)
28-30 (3 reds). 48 sc
31. (6 sc, dec)x6 (42)
32-34. (3 reds). 42 sc
35. (5 sc, dec)x6 (36)
36-38. (3 rnds). 36 sc Stuff.
39. (4 sc, dec)x6 (30)
40-42. (3 reds). 30 sc
43. (3 sc, dec)x6 (24)
44. (2 sc, dec)6 (18)
Change to grey color.
Do not cut the white thread, leave it on the outside.
45. 18 sc BLO
46-47. (2 rnds). 18 sc
Leave thread to sew on the head.
Stuff.
Crochet the neck with white thread behind the FLO stitches of row 45, hooking from bottom to top — (2 sc, inc)x6
Cut off the thread and fasten it.
Decorate as desired.

EARS-HEAD:
Grey color.
1. 6 sc into MR
2. (sc, inc)x3 (9)
3. (2 sc, inc)x3 (12)
4. (3 sc, inc)x3 (15)
5. (4 sc, inc)x3 (18)
6. (5 sc, inc)x3 (21)
7-15. (9 rnds). 21 sc
16. (5 sc, dec)x3 (18)
17. 18 sc
Mark stitches 4 to 9 of a row (inner ear).
18. 3 sc, skip the marked 6 loops (inner ear), 3 sc, 6 sc together with the inner ear loops (12)
19. 12 sc
20. (2 sc, dec)x3 (9)
21-22 (2 rnds). 9 sc
Cut off the thread on the right ear and fasten it.
On the left ear, if necessary, knit another 1-2 sc so that the end of the row is exactly at the side.
On the right ear, mark a point on the side.
Cast on 6 stitches from the left ear, connect to the right ear:
1. 9 sc along to right ear, 6 sc along to chain, 9 sc along to left ear, 6 sc along to chain (30)
2. 4 sc, inc, 5 sc, inc, 2 sc, inc, 5 sc, inc, 5 sc, inc, 2 sc, inc, sc (36)
3. 32 sc — we stopped at the back in the middle, put a marker the beginning of the row.
4. (5 sc, inc)x6 (42)
5. 42 sc
6. (6 sc, inc)x6 (48)
7-8 (2 rnds). 48 sc
9. (7 sc, inc)x6 (54)
10-18 (9 reds). 54 sc
19. (7 sc, dec)x6 (48)
20. (4 sc, dec)x8 (40)
21. (3 sc, dec)x8 (32)
22. (2 sc, dec)x8 (24)
Stuff.
23. (sc, dec)x8 (16)
24. 8 dec
Add filler material, close the hole.
Mark the attachment points for the eyes – 11 rows below the ear line, 10 stitches between points.
Eyes -5 mm.
Take a separate thread for each eye. Bring the threads down to the bottom of the head.
Embroider the nose 2 rows below the eyes, 3 stitches wide. Embroider the whites of the eyes and the eyebrows.

Assembly:
Sew the head onto the body. When a small hole remains, add filler to the neck.
Sew a tail on the back centre of the back.
Sew on hands with button fasteners.
If you wish, you can add accessories to the bunny.
Congratulations

More Amigurumi Bunny Ideas

Materials:
Color yarn:
Beige, white, brown and Mustard
Any color for the clothes
Safety eyes 7mm
Crochet hook 2mm
Brown embroidery thread
Fiber filling
Sewing needle
Stitch marker
Blush for the cheecks

Abreviations:
sc: single crochet
inc: increase
dec: decrease
hdc: half double crochet
dc: double crochet
sl st: slip stitch
BLO: back loop only
FLO: front loop only

Body and Head:
With yarn in the color of the clothes make:
1. 6sc into magic ring
2. 6inc (12)
3. (lsc, linc) x6 (18)
4. (2sc, linc) x6 (24)
5. 24sc BLO
6. 24sc
7. (6sc, ldec) x3 (21)
8. 2lsc
9. (5sc, ldec) x3 (18)
10. l8sc
11. 9dec (9)
Change to beige color Star the head
12. 9inc FLO (18)
13. (2sc, linc) x6 (24) 14 to 18. 24sc
Place safety eyes between rows 15 and 16 with 5sc of distance between them.
19. (2sc, ldec) x6 (18)
20. (lsc, ldec) x6 (12)
21. 6dec
Embroider the details on the eyes and eyebrows. Apply blush on the cheeks.

Hair:
With brown color yarn
1. 6sc into magic ring
2. 6inc (12)
3. (lsc, linc) x6 (18)
4. (2sc, linc) x6 (24)
5. (7sc, linc) x3 (27) 6 to 9. 27sc
Finish with a slip stitch and leave a long thread to sew on the head.

Wings (2x):
With white color yarn:
1. 6sc into magic ring
2. 6inc (12)
3 to 5. l2sc
6. Fold in half and close the wings making:
In the 1st wing: 4sc, lhdc inc, ldc inc anf finish with a sl st.
In the 2nd wing: 2 chains, ldc inc, lhdc inc, 4sc and finish with a sl st.
In both, leave a long thread to sew to the back of the little angel.

Halo:
With mustard color yarn:
1. Make 24 chains, close with a sl st forming a circle.
2. 24 slst all araund the chains.
Finish with a sl st and leave a thread to sew on the head.
Congratulations

More Amigurumi Doll Ideas

Abbreviations and Materials:
MR – Amigurumi Magic ring
sc : Single Crochet
hsc : Half single crochet
inc : Increase
dec : Decrease
tr : Triple Crochet/ Treble Crochet
st: Stitch
dc : Double Crochet
hdc: Half Double Crochet
sl-st or Slst: Slip Stitch
ch : Chain
tch: Turnin chain crochet
FLO : Crochet into front loops only
BLO : Crochet into back loops only

Hat+head+body:
Start with red yarn.
All elements are crocheted in a spiral.
1 row: 4 sc in magic ring (4)
2 row: (1 sc, 1sc inc)*2 (6)
3 row: 6 sc (6)
4 row: (2 sc, 1sc inc)*2 (8)
5 row: (3 sc, 1sc inc)*2 (10)
6 row: (4 sc, 1sc inc)*2 (12)
7 row: 12 sc (12)
8 row: (3 sc, 1sc inc)*3 (15)
9 row: 15 sc (15)
10 row: (4 sc, 1sc inc)*3 (18)
11 row: 18 sc (18)
12 row: (5 sc, 1sc inc)*3 (21)
13 row: (6 sc, 1sc inc)*3 (24)
Connect beige yarn:
14 row: BLO – 24 sc (24)
15-16 rows: 24 sc (24)
Connect grey yarn:
17-25 rows: 9 rows – 24 sc (24)
26 row: BLO – 24 sc (24)
Add stuffing.
27 row: 12 sc dec (12)
28 row: 6 sc dec (6).
Tie off the thread and hide it inside.

Hat:
With red yarn.
Turn the body and connect the thread into the first front loop of the 14th row.
1 row: 24 sc (24)
2 row: 9 sc, 6 sc inc, 9 sc (30)
3 row: 9 sc, (1 sc, 1 sc inc)* 6, 9 sc (36)
4 row: 36 sc (36)
5 row: 9 sc, (1 sc, 1 sc dec)*6, 9 sc (30)
Finish with sl st. Tie off the thread and hide it inside.

Nose:
With beige yarn.
Crochet 3 ch.
1 row: start in the second loop from the hook and crochet 1 sc, 3 sc in last ch, 1 sc, 3 sc in the first loop of the chain (8)
2 row: 1 sc, 3 sc inc, 1 sc, 3 sc inc (14)
3 row: 14 sc (14)
4 row: 1 sc, 3 sc dec, 1 sc, 3 sc dec (8)
Tie off the thread and leave enough for sewing. Stuff the nose.
See the nose under the hat.
Beard: cut some segments of the yarn and insert them through the loops under the nose.
Your gnome is ready!!!
More Amigurumi Gnome İdeas:

Required materials and tools:
Himalaya Dolphin Baby Plush Yarn
Hook 3.5-5.0 mm. The hook number depends on your knitting density. I am using a 3.5mm hook
Hook 2.5 mm for pom pom
Filler
Large eye stitching needle
Scissors
Eyes 8 mm
For beard, eyebrows, cap, suit, pom-pom Softy Alize (color 55 – white)
Art pastels for cheeks (optional)

Abbreviations:
sc : Single Crochet
inc : Increase
dec : Decrease
tr : Triple Crochet/ Treble Crochet
st: Stitch
dc : Double Crochet
hdc: Half Double Crochet
sl-st : Slip Stitch
ch : Chain
..in : make increase into same stitch as many as the number which is given in front of “inc” abbreviation (exp; 3inc, 4inc..).
FLO : Crochet into front loops only
BLO : Crochet into back loops only
BL : Bobble Stitch – do 5dc all in the same stitch and then yarn over and pull through all the loops on your hook (the original loop + 1 loop for each partially completed dc).

Legs (2 parts):
In black:
1. 5 sc in MR
2. 5 пр (10)
3. 10 sc
Change to red:
4-7. 10 sc
We fix and cut the yarn on the first leg.
We knit the second leg, we do not cut the yarn. We knit one air loop and connect with the first leg.

Body and head:
1. We knit 10 sc one leg at a time, + a column to the junction, a column to an air loop, + a column to a junction, 10 sc along the second leg, a column to an air loop (24)
2. (3 sc, inc)*6 (30)
3. (4 sc, inc)*6 (36)
4-9. 36 sc
10. (4 sc, dec)*6 (30)
11. We knit 30 sc for the back wall
12. (3 sc, dec)*6 (24)
13. 24 sc
14.(2 sc, dec)*6 (18)
15-16. 18 sc
17. (1 sc, dec)* 6 (12)
Change the yarn to the bodily one:
18. 12 sc
19. 12 пр (24)
20. (3 sc, inc)*6 (30)
21-25. 30 sc
26. (3 sc, dec)*6 (24)
Insert eyes between 24-25 rows, 3 sc apart.
27. (2 sc, dec)*6 (18)
28. (1 sc, dec)* 6 (12)
29. 6 dec
We tighten the hole, hide the yarn. We embroider the nose.

Hands (2 parts):
We start knitting with a flesh-colored yarn:
1. 6 sc in MR
2. (1 sc, inc)*3 (9)
3. We knit 9 sc, fold, the last loop should be on the side, if not, then we need to knit the right amount of sc for offset. (I have 2 columns). Next, make a picot of 3 ch.
4. (1 sc, dec)*3 (6)
Change the yarn to red:
5. 6 sc
6. 6 sc behind the back wall loops
7-13. 6 sc
Fold in the handle and knit by both sides 3 sc.

Cap:
We start in red:
1. 4 sc in MR
2. (1 sc, inc)*3 (6)
3. 6 sc
4. (1 sc, inc)*3 (9)
5-7. 9 sc
8. (2 sc, inc)*3 (12)
9-11. 12 sc
12. (3 sc, inc)*3 (15)
13-15, 15 sc
16. (4 sc, inc)*3 (18)
17-18. 18 sc
19. (2 sc, inc)*6 (24)
20. 24 sc
21. (3 sc, inc)*6 (30)
22. (4 sc, inc)*6 (36)
23. (5 sc, inc)*6 (42)
Change the yarn to Softy Alize:
24-25. 42 sc

Pompon:
Hook 2.5 mm
Knit with Softy Alize yarn:
1. 6 sc in MR
2. 6 inc (12)
3. (1 sc, inc)*6 (18)
4. (2 sc, inc)* 6 (24)
5-9. 24 sc
10. (2 sc, dec)* 6 (18)
11. (1 sc, dec)*6 (12)
12. 6 уб (6)
We tighten the hole, leave the thread for sewing.
1. When knitting the body in the 11th row, we knit for the back walls 30 sc. Now we introduce the red color behind the front wall and knit two rows of 30 sc. Then change to Softy Alize and knit two rows of 30 sc.
2. When knitting handles, in the 6th row we knit 6 sc for the back loops.
Now we insert Softy Alize behind the front wall and in EACH we make a pr from sc (12), the second row just knit 12 sc.
3. Sew the pom-pom to the cap.
4. Sew the cap to the head. I fold the long part of the cap and sew it to the head.
5. We make a beard from Softy Alize, in MR, each column with two strings (to make it thicker).
6. Draw the cheeks.
7. We embroider the eyebrows.
Your New Year friend is ready!
More Amigurumi Santa Claus:

Abbreviations:
MR – magic ring
SC – single crochet
DC – double crochet
HDC – haft double crochet
INC – increase
DC INC – 2DC in one stitch
DEC – decrease
SLST – slip stitch
CH – chain

Materials:
5mm yarn for the body
(beige,white)
3.5mm yarn for the details
(cream,red,green)
5mm & 4mm crochet hook
(could be changed depending on your yarn size)
Yarn needle & stitch marker
14mm safety eyes
Fiber fill
Scissor & hot glue
Black felt fabric

– We’ll will be working in spiral rounds , do nod slip sfich and chain 1 acfer every round.
Start with 5mm yarn color in beige, white 5mm hook for the body.

Head:
1: 6SC in MR (6)
2: INC x 6 (12)
3: (1SC, INC) x 6 (18)
4: (2SC, INC) x 6 (24)
5: (3SC, INC) x 6 (30)
6-11: SC around (30)
Place safety eyes between round 8-9 (4 stitches apart)
12: (3SC, DEC) x 6 (24)
Stuff head
13: (2SC, DEC) x 6 (18)
Fasten off, cut the yarn.

Arms (make 2):
1: 6SC in MR (6)
2: (1SC, INC) x 3 (9)
3: SC around (9)
4: change to white SC around (9)
5,6: back to beige SC around (9)
7: (2SC, DEC) x 2, SC (7)
8: SC around (7)
Fasten off, cut long tail for sewing.
DO NOT stuff.

Legs & Body:
Using same yarn and hook size as the head

Legs (make 2):
1: 6SC in MR (6)
2: INC x 6 (12)
3: SC around (12)
4: Change to white yarn SC around (12)
5,6: Back to beige yarn SC around (12) – stuff
Fasten off, cut the yarn.
Crochet the second leg in the same way but do not cut the yarn.
CH1 and join with the first leg and continue crocheting in a spiral to make the body.

Body:
7: SC around (26 including 2 stitches on the chain)
8-12: SC around (26)
Stuffing as you go
13: (2SC, DEC)x6, 2SC (20)
14,15: SC around (20)
Fasten off, cut long tail and sew body to the head.

Cream:
*Color in cream
1: 6SC in MR (6)
2: INC x 6 (12)
3: (SC, INC) x 6 (18)
4: (2SC, INC) x 6 (24)
5: (3SC, INC) x 6 (30)
6: (4SC, INC) x 6 (36)
7: (SLST, I4DC, DC INC, 14DC) x 9
Fasten off, cut long tail and sew it on to the head.

Buttons (make 2):
*Color in red
8SC in MR (8)
SLST in the next stitch to make a circle.
Fasten off, cut long tail and sew it on to the

Bow:
*Color in green
Chain 7
From the second stitch of the chain:
5SC, 3SC in last stitch, continue crocheting the other side of the chain 4SC, INC, SLST in the next stitch.
Fasten off, cut long tail.
Using needle to hide the tail to middle part, wrap around and tie it to make a bow. Sew it onto the body.
*for all the details, i used 3.5mm yarn and 4mm hook. If you don’t have similar yarn size, you can use the same yarn as the body with smaller hook.

Leafs (make 3):
Chain 7
Start from the second stitch of the chain:
2SC, 2HDC, 2SC, continue crocheting the opposite side of the chain, 2SC, 2HDC, 2SC, SLST in the next stitch.
Fasten off, cut long tail for sewing.

Berry (make 2):
1: 6SC in MR (6)
2: INC x 6 (12)
3: DEC x 6 (6)
DO NOT stuff.
Fasten off, close up the hole.
Sew 3 leafs together then sew all 3 and the berries on the cream part.
Congratulations!

Materials:

• Yarn: Gazzal Baby Cotton
• Hook size: 1.75 mm
• 8 mm halfbeads for eyes
• Decorate button
• Pink dry pastel crayon
• Sewing needle and scissors
• Fiberfill

Abbreviations:
R = row
mc = magic circle
ch = chain
sc = single crochet
st = stitch
inc = 2 sc in the next stitch
dec = single crochet 2 stitches together
FLO = front loop only
BLO = back loop only
F.o. = finish off
= 12 = number of stitches you should have at the end of the row
( )*6 = repeat whatever is between the brackets the number of times stated

Hat:
R 1: 6 sc in mc (6)
R 2: (inc)* 6 (12)
R 3-4: 12 sc (2 rows)
R 5: (1 sc, inc)*6 (18)
R 6-7: 18 sc (2 rows)
R 8: (2 sc, inc)*6 (24)
R 9-10: 24 sc (2 rows)
R 11: (3 sc, inc)*6 (30)
R 12-13: 30 sc (2 rows)
R 14: (4 sc, inc)*6 (36)
R 15-16: 36 sc (2 rows)
R 17: (5 sc, inc)*6 (42)
R 18-19: 42 sc (2 rows)
R 20: (6 sc, inc)*6 (48)
R 21-22: 48 sc (2 rows)
R 23: (7 sc, inc)*6 (54)
R 24: 54 sc
R 25: FLO 54 sc
R 26: (8 sc, inc)*6 (60)
R 27-28: 60 sc (2 rows)
Change to white yarn:
R 29: reverse sc in every st to the end of row
F.o.

Nose:
With beige yarn:
R 1: 6 sc in mc (6)
R 2: (inc)* 6 (12)
R 3: (3 sc, inc)*3 (15)
R 4-8: 15 sc (5 rows)
R 9: (3 sc, dec)*3 (12)
R 10: (dec)*6 (6)
F.o., leaving a tail for sewing.

Head:
Go to the R 25 of the hat and join the beige yarn.
R 1: BLO 54 sc
R 2-5: 54 sc (4 rows)
R 6: (7 sc, dec)*6 (48)
R 7: (6 sc, dec)*6 (42)
R 8: (5 sc, dec)*6 (36)
R 9: (4 sc, dec)*6 (30)
R 10: (3 sc,dec)*6 (24)
R 11: (2 sc, dec)*6 (18)
R 12: (1 sc, dec)*6 (12)
R 13: (dec)*6 (6)
F.o.

Make a pompom using white and other one yarn. Sew it on the top of the hat.
Sew the nose to the head, glue eyes to the face. Tint cheeks using dry pastel crayon.
Make a loop for hanging (50 ch).
Congratulations!
More Amigurumi Gnome İdeas:

Materials:
1.Yarn.
When knitting, I used:
* YarnArt Jeans (skein weight: 50 gr., Thread length: 160 m, Composition: 55% cotton, 45% polyacrylic, Manufacturer: Turkey)
Colors: N 51 – red, N 63 – dark green, N 07 – brown, N 01 – white, N 52 – green.
2. Hook N 1.75
3. Filler – holofiber, sintepon
4. Eyes with a diameter of 1 cm.
5.2 buttons with a diameter of 1 cm (for fastening the hands)
6. Basting needles
7. Stitching needle
8. Scissors
9. Threads for sewing
10. The spout is 9 mm long.
11. Buttons for shoulder straps 2 pcs in a diameter of 5 mm.
12. White felt to decorate the eyelet (I have sequins)
13. Cardboard
14. 15 pcs of multi-colored buttons with a diameter of 5 mm for decorating horns.
15. Pom-poms / beads 3 pcs with a diameter of 0.9 (10) mm

Abbreviations:
AR – Amigurumi Magic ring
App – application
ll – lift loop
sc : Single Crochet
inc : Increase
dec : Decrease
tr : Triple Crochet/ Treble crochet
st: Stitch
dc : Double Crochet
hdc: Half Double Crochet
sl-st : Slip Stitch
ch : Chain
..in : make increase into same stitch as many as the number which is given in front of “inc” abbreviation (exp; 3inc, 4inc..).
FLO : Crochet into front loops only
BLO : Crochet into back loops only
BL : Bobble Stitch – do 5dc all in the same stitch and then yarn over and pull through all the loops on your hook (the original loop + 1 loop for each partially completed dc).

1.HEAD:
We knit with brown yarn.
We fill the detail in the knitting process.
1.) 6 sc in AR (6)
2.) 6 inc (12)
3.) (1 sc , inc)*6 (18)
4.) 1 sc, inc, (2 sc, inc)*5, 1 sc (24)
5.) (3 sc, inc)*6 (30)
6.) 2 sc, inc, (4 sc, inc)*5, 2 sc (36)
7.) (5 sc, inc)*6 (42)
8.) – 10.) 42 sc (42, 3 rows)
11.) 1 sc, (3 sc, inc)*5, 1 sc, (3 sc, inc)*5 (52)
12.) 1 sc, (4 sc, inc)*5, 1 sc, (4 sc, inc)*5 (62)
13.) 1 sc, (5 sc, inc)*5, 1 sc, (5 sc, inc)*5 (72)
14.) – 15) 72 sc (72, 2 rows)
16.) 1 sc, (5 sc, dec)*5, 1 sc, (5 sc, dec)*5 (62)
17.) 1 sc, (4 sc, dec)*5, 1 sc, (4 sc, dec)*5 (52)
18.) 1 sc, (3 sc, dec)*5, 1 sc, (3 sc, dec)*5 (42)
19.) (5 sc, dec)*6 (36)
20.) 2 sc, dec, (4 sc, dec)*5, 2 sc (30)
21.) (3 sc, dec)* (24)
22.) 1 sc, dec, (2 sc, dec)*5, 1 sc (18)
23.) (1 sc, dec)*6 (12)
We make 2 decreases and tighten the hole.
How to pull off the hole can be found in the appendix to the crochet pattern.

2. MUZZLE:
We knit with white yarn.
We collect 12 ch, we begin to knit from the second loop from the hook:
1.) 10 sc, 3 sc in one loop, 9 sc, inc (24)
2.) inc, 9 sc, (inc)*3, 9 sc, (inc)*2 (30)
3.) – 4.) 30 sc (30, 2 rows)
We knit sl st, fix the thread, cut it off.

3. EARS (2 PARTS):
We knit with brown yarn.
We do not fill the part.
1.) 6 sc in AR (6)
2.) inc, 5 sc (7)
3.) inc, 6 sc (8)
4.) inc, 7 sc (9)
5.) (2 sc, inc)*3 (12)
6.) (3 sc, inc)*3 (15)
7.) (2 sc, inc)*5 (20)
8.) (3 sc, inc)*5 (25)
9.) 25 sc (25)
10.) (3 sc, dec)*5 (20)
Fold the piece in half and knit 10 sc for both sides.
Using the hook, we hide the ponytails inside the part.
Fold each ear in half and sew.

4. HORNS:
The horns are made up of three pieces that are joined together.
We knit with dark green yarn, we fill in the process of knitting.
Detail No. 1:
1.) 6 sc in AR (6)
2.) (1 sc, inc)*3 (9)
3.) – 4.) 9 sc (9, 2 rows)
We fix the thread, cut it off.
Part No. 2:
1.) 6 sc in AR (6)
2.) (1 sc, inc) * 3 (9)
3.) – 4.) 9 sc (9, 2 rows)
We connect parts N 1 and N 2.
How to connect parts is discussed in the App.
We knit:
9 sc – according to part No. 1,
9 sc – according to part No. 2.

We get 18 loops in a row.
We continue to knit.
5.) 9 dec (9)
6.) – 12.) 9 sc (9, 7 rows)
We knit sl st,
fix the thread, cut it off.
Part No. 3:
1.) 6 sc in AR (6)
2.) (1 sc, inc) * 3 (9)
3.) – 4.) 9 sc (9, 2 rows)
We knit sl st, fix the thread, cut it off.
Part No. 3 is not tightly filled and we sew / glue on the 8- 10th row of part No. 2.

5. LEGS (2 parts):
RIGHT LEG
We start knitting with white yarn.
We collect 6 ch, we begin to knit from the second loop from the hook:
1.) 4 sc, 3 sc in one loop, 3 sc, inc (12)
2.) inc, 3 sc, (inc)*3, 3 sc, (inc)*2 (18)
3.) 1 sc, inc, 3 sc, (1 sc, inc)*3, 3 sc, (1 sc, inc)*2 (24)
Change the color of the yarn to red.
4.) We knit by the jumper 24 sc (24)
You will find how to knit by the jumper in the App.
5.) 24 сбн (24)
Now we need to cut the insoles into our boots. We
circle the part on cardboard, cut it out and insert it into the boots.
6.) 4 sc, (dec)*3, 1 sc, (dec) *3, 7 sc (18)
7.) 4 sc, dec, decrease from three loops, dec, 7 sc (14)
I explain how to make a decrease from three loops in the App.
Change the color of the yarn to green. You will find how to change the color in the App.
8.)We knit for the back half-loops: (2 sc, dec, 1 sc, dec)*2 (10)
We fill the leg. Next, we will fill the part in the knitting process.
9.) 10 sc (10)
Change the color of the yarn to white.
10.) 10 sc (10)
Change the color of the yarn to green.
11.) – 12.) 10 sc (10, 2 rows)
Change the color of the yarn to white.
13.) 10 sc (10)
Change the color of the yarn to green.
14.) – 15.) 10 sc (10, 2 rows)
Change the color of the yarn to white.
16.) 10 sc (10)
Change the color of the yarn to green.
Knit an additional 5 sc, fix the thread and cut.

LEFT LEG:
We start knitting with white yarn.
We collect 6 ch, we begin to knit from the second loop
from the hook:
1.) 4 sc, 3 sc in one loop, 3 sc, inc (12)
2.) inc, 3 sc, (inc)*3, 3 sc, (inc)*2 (18)
3.) 1 sc, inc, 3 sc, (1 sc, inc)*3, 3 sc, (1 sc, inc)*2 (24)
Change the color of the yarn to red.
4.) We knit by the jumper 24 sc (24)
You will find how to knit by the jumper in the App.
5.) 24 sc (24)
Now we need to cut the insoles into our boots. We circle the part on cardboard, cut it out and insert it into the boots.
6.) 4 sc, (dec)*3, 1 sc, (dec) *3, 7 sc (18)
7.) 4 sc, dec, decrease from three loops, dec, 7 sc (14)
I explain how to make a decrease from three loops in the App.
Change the color of the yarn to green. You will find how to change the color in the App.
8.)We knit for the back half-loops: (2 sc, dec, 1 sc, dec)*2
(10)
We fill the leg. Next, we will fill the part in the knitting process.
9.) 10 sc (10)
Change the color of the yarn to white.
10.) 10 sc (10)
Change the color of the yarn to green.
11.) – 12.) 10 sc (10, 2 rows)
Change the color of the yarn to white.
13.) 10 sc (10)
Change the color of the yarn to green.
14.) – 15.) 10 sc (10, 2 rows)
Change the color of the yarn to white.
16.) 10 sc (10)
Change the color of the yarn to green.
Knit an additional 9 sc, do not cut the thread, continue knitting. Next, we knit the body.

The upper part of the boots
We use red yarn. We make a loop and attach it to the front half loop (to the first half loop) of the 8th row.
How to attach a loop to a knitted product for the front half loop is shown in the App.
1.) ch., (2 sc, inc)*3, 4 sc (17)
2.) (3 sc, inc)*3, 5 sc (20)
We knit sl st, fix the thread, cut off.

6.BODY:
We connect the legs. How to connect the legs is discussed in the App.
We continue to knit.
We collect 8 ch, we knit:
10 sc – on the right leg,
8 sc – by transition,
10 sc – on the left,
8 sc – by transition,
10 sc – on the right,
8 sc – by transition.
We put a marker, mark the beginning of the first row.
We should have 36 loops in a row.
We change the yarn to white.
1.) (5 sc, inc)*6 (42)
Change the color of the yarn to green.
2.) – 3.) 42 sc (42, 2 rows)
Change the color of the yarn to white.
4.) 42 sc (42)
Change the color of the yarn to green.
5.) – 6.) 42 sc (42, 2 rows)
Change the color of the yarn to white.
7.) 42 sc (42)
Change the color of the yarn to green.
8.) – 9.) 42 sc (42, 2 rows)
Change the color of the yarn to white.
10.) We knit by the jumper: 7 sc, dec, 19 sc, dec, 12 sc (40)
11.) 16 sc, dec, 18 sc, dec, 2 sc (38)
12.) 7 sc, dec, 17 sc, dec, 10 sc (36)
13.) 15 sc, dec, 16 sc, dec, 1 sc (34)
14.) 6 sc, dec, 15 sc, dec, 9 sc (32)
15.) 14 sc, dec, 14 sc, dec (30)
16.) 5 sc, dec, 13 sc, dec, 8 sc (28)
17.) 12 sc, dec, 12 sc, dec (26)
18.) 5 sc, dec, 11 sc, dec, 6 sc (24)
19.) 10 sc, dec, 10 sc, dec (22)
20.) 5 sc, dec, 9 sc, dec, 4 sc (20)
Change the color of the yarn to brown.
21.) – 22.) 20 sc (20, 2 rows)
We knit sl st, fix the thread, cut it off.

7. HANDS (2 PARTS):
We start knitting with red yarn. We fill from 1 to 6 rows.
1.) 6 sc in AR (6)
2.) 6 inc (12)
3.) – 4.) 12 sc (12, 2 rows)
5.) 3 sc, 4 dc with a common base and one top, 8 sc (12)
How to knit 4 dc with a common base and one top I show in detail in the App.
6.) (2 sc, dec) *3 (9)
7.) 9 sc (9)
Change the yarn to white.
8.) We knit for the back half-loops 9 sc (9)
9.) – 20.) 9 sc (9, 12 rows)
We knit an additional 3 sc, fold the part in half and knit
5 sc for both walls

TOP OF MITTENS:
We use red yarn. We make a loop and attach it to the front half loop (to the first half loop) of the 8th row.
Knit: ch, 1 sc, inc, (2 sc, inc) * 2 (12)
We close the row sl st in ch, fix the thread, cut it off.
Congratulations!
More Amigurumi Christmas Reindeer İdeas:

Materials:
– Medium worsted weight yarn
– Size C 2.75mm hook
– 10mm safety eyes
– Black buttons
– Polyester fiberfill
– Scissors
– Yarn needle

ABBREVIATIONS:
– Rnd – Round
– Sc – Single crochet
– Dc – Double crochet
– SI st – Slip stitch
– Inc – Increase
– Dec – Decrease
– BLO – Back loop only
– Ch – Chain

Head:
white color
Rnd 1. 6 sc in magic ring
Rnd 2. Inc in each st around
Rnd 3.1 sc, inc *6
Rnd 4. 2 sc, inc *6
Rnd 5. 3 sc, inc *6
Rnd 6. 4 sc, inc *6
Rnd 7. 5 sc, inc *6
Rnd 8. 6 sc, inc *6
Rnd 9-16. Sc in each st
– Place safety eyes 12 sts apart between rnd 13 & 14
Rnd 17. 6 sc, dec *6
Rnd 18. 5 sc, dec *6
Rnd 19. 4 sc, dec *6
Rnd 20. 3 sc, dec *6
Rnd 21. 2 sc, dec *6
– Finish off with a sl st
– Cut a long yarn tail for sewing
– Stuff the head firmly

Body:
white color
Rnd 1. 6 sc in magic ring
Rnd 2. Inc in each st around
Rnd 3. 1 sc, inc *6
Rnd 4. 2 sc, inc *6
Rnd 5. 3 sc, inc *6
Rnd 6. 4 sc, inc *6
Rnd 7. 5 sc, inc *6
Rnd 8-16. Sc in each sc
Rnd 17. 5 sc, dec *6
Rnd 18. [4 sc in BLO, dec in BLO] *6
Rnd 19. 3 sc, dec *6
Rnd 20. 2 sc, dec *6
– Stuff the body firmly
Rnd 21.1 sc, dec *6
Rnd 22. Dec *6
– Sew the body closed
– Sew the head onto the body between rnds 3 & 4
– Glue or sew the black buttons onto the body

Arms:
– Start with Green
Rnd 1. 6 sc in magic ring (6)
Rnd 2.1 sc, inc *3 (9)
Rnd 3-4. Sc in each st around (9)
– Switch to White
Rnd 5. Sc in each st around (9)
in the BLO.
Rnd 6-10. Sc in each st around (9)
– Finish off with a sl st
– Stuff the mitten lightly
– Sew to the body between rnds 5 & 6

Nose:
Orange color
Rnd 1. 6 sc in magic ring (6)
Rnd 2. 2 sc, inc *2 (8)
Rnd 3. Sc in each st around (8)
Rnd 4. 3 sc, inc *2 (10)
– Finish off with a sl st and cut a long tail for sewing
– Stuff the nose lightly
– Sew onto the head with the top of the nose level with the top of the eyes

Pom Pom:
White Color
1.Cut a long piece of yarn (at least 30cm/12in).
2.Wrap your yarn around 2 or 3 fingers until it is quite thick (a fork or toilet roll work well also).
3.When you are happy with the thickness, tie the long piece of yarn tightly around the center of your wrapped yarn.
4.Trim the rounded ends and trim the pom’s shape.

Scarf:
Red color.
Make a slip knot and chain 71. Dc in the 4th ch from your hook in the back bump of the chain. Dc in each back bump across.
– 68 dc total for the scarf
– Finish off by chaining 2 and cut a yarn tail for sewing.
– Sew the final 2 chains to the starting point of the scarf ch.
– Weave the ends in to the scarf

Hat:
Green color
(Worked in joining rounds)
Rnd 1. 6 sc in magic ring (6)
Rnd 2. Ch 2, dc 3 in each st around (18)
Rnd 3. Ch 2, [dc, inc, inc] *6 (30)
Rnd 4. Ch 2, [dc, dc, inc, dc, inc] *6 (42)
Rnd S. Ch 2, [6 dc, inc] *6 (48)
Rnd 6-7. Ch 2, dc in each st around (48)
Rnd 8-9. Ch 1, sc in the BLO around (48)
– Cut a long tail of yarn and sew the hat closed with an invisible finish.
– Sew the pom pom to the center of the hat
More Amigurumi Snowman İdeas: